Electropolishing molybdenum Wire.
Motsoako oa lik'hemik'hale:
Likarolo tse kholo le tse nyane | Min.content(%) |
Mo | 99.97 |
Litšila | Maemo a holimo (μg/g) |
Al | 10 |
Cu | 20 |
Cr | 20 |
Fe | 20 |
K | 20 |
Ni | 10 |
Si | 20 |
W | 300 |
C | 30 |
H | 10 |
N | 10 |
O | 40 |
Cd | 5 |
Hg | 1 |
Pb | 5 |
Litekanyo le mamello:
Diameter(mm) | φ-Mamello (%) | Max.boleng bo tsoile ho pota-pota |
0.30-0.79 | ±2.0 | Ka hare ho Mamello |
0.80-1,49 | ±1.5 | 0.010 limilimithara |
1.50-3,99 | ±1.0 | 0.025 limilimithara |
4.00-10.0 | ±1.0 | 0.050 limilimithara |
Lintho tsa 'mele le tsa mochini oa sehlahisoa:
Diameter (mm) | Tensile Matla (MPa) |
0.30-0.49 | 1000-1300 |
0.50-0,79 | 800-1200 |
0.80-1,49 | 750-1100 |
1.50-3,99 | 650-1000 |
4.00-10.0 | hoo e ka bang 600 |
Elongation: ≥10%
Boima: 10.2g/cm³
Liteko tse sa senyeheng: Teko ea hajoale ea Eddy ea 100%, boholo ba boleng bo arohaneng. 0.5 %
Bokaholimo:
1.0.30-1.00mm Electropolished (boholimo bo khanyang)
2.0.30-1.00mm E hloekisitsoe ka lik'hemik'hale (ka holim'a tšepe e lerootho)
Ngola molaetsa wa hao mona mme o re romele wona