Tungsten Plate
Halabuurka kiimikada:
| Qaybaha ugu muhiimsan iyo kuwa yar yar | Min.content(%) | ASTM B760 |
| W | 99.97 | dheelitirnaan |
| wasakhda | Qiimaha ugu badan (μg/g) | Qiimaha ugu badan (μg/g) |
| Al | 15 | - |
| Cu | 10 | - |
| Cr | 20 | - |
| Fe | 30 | 100 |
| K | 10 | - |
| Ni | 20 | 100 |
| Si | 20 | 100 |
| Mo | 300 | - |
| C | 30 | 100 |
| H | 5 | - |
| N | 5 | 100 |
| O | 20 | 100 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Cabirka iyo dulqaadka:
Go'yaal qabow oo duuban
| Dhumucda (mm) | Dulqaadka dhumucda (±mm) | ||
| Ballaca ≤200mm | Ballaca ugu badan 510mm | Dulqaad ballaaran (± mm) | |
| 0.025 | 0.003 | ||
| 0.025-0.03 | 0.004 | 0.5 | |
| 0.03-0.04 | 0.005 | 0.5 | |
| 0.04-0.05 | 0.006 | 0.5 | |
| 0.05-0.06 | 0.008 | 0.5 | |
| 0.06-0.08 | 0.010 | 0.5 | |
| 0.08-0.10 | 0.015 | 0.5 | |
| 0.10-0.15 | 0.025 | 0.045 | 0.5 |
| 0.15-0.30 | 0.035 | 0.060 | 1.0 |
| 0.30-0.40 | 0.05 | 0.085 | 1.6 |
| 0.40-0.50 | 0.06 | 0.110 | 1.6 |
Go'yaal kulul oo kulul
| Dhumucda (mm) | Dulqaadka dhumucda (±mm) | ||
| Ballaca ≤510mm | Ballaca ugu badan 1200 (mm) | Dulqaad ballaaran (± mm) | |
| 0.05-0.60 | 0.110 | 1.6 | |
| 0.60-0.80 | 0.140 | 2.0 | |
| 0.08-1.00 | 0.200 | 2.0 | |
| 1.00-2.00 | 0.250 | 2.0 | |
| 2.00-8.00 | 0.300 | 2.0 | |
| 8.0-20.00 | 5% | 5% | 2.0 |
Dulqaadka dhererka: dulqaadka dhererka dhammaan cabbirada waa ugu badnaan +5/-0 mm.
flatness: max. 4% (habraaca cabbiraadda oo ku saleysan ASTM B760)
Cufnaanta: dhumucdiisuna tahay 10.00mm cufnaanta;19.2g/cm³
dhumucdiisuna (10.00-20.00mm) cufnaanta: 19.1g/cm³
adkaanta Vickers:
≤0.10 mm ≥550 HV
0.10-0.05 mm ≥500 HV
0.50-1.50mm ≥470 HV
1.50-10.00mm ≥450 HV
10.00-20.00mm ≥420 HV
Muuqaal: Maaddadu waxay noqon doontaa mid tayo leh, oo ka madax bannaan walxaha shisheeye, dillaaca iyo jabka.
Sariirta sariirta (oo aan la jarjarin) waxay yeelan kartaa dildilaaca gees yar.
Tayada dusha sare:
Qabow duuban ≤ 0.30mm dhalaalaya
Qabow duuban 0.3-0.5 mm la jarjaray
Kulul duuban ≥0.50 mm pickled
