Tantalum Sheet
Halabuurka kiimikada:
Qaybaha ugu muhiimsan iyo kuwa yar yar | Min.content(%) | ASTM B386 (361) |
Ta | 99.95 | dheelitirnaan |
wasakhda | Qiimaha ugu badan (μg/g) | Qiimaha ugu badan (μg/g) |
Fe | 100 | 100 |
Mo | 100 | 200 |
Nb | 400 | 100 |
Ni | 50 | 100 |
Si | 50 | 50 |
Ti | 50 | 100 |
W | 100 | 500 |
C | 30 | 200 |
H | 15 | 15 |
N | 50 | 100 |
O | 100 | 250 |
Cd | 10 | - |
Hg | 10 | - |
Pb | 10 | - |
Cabirka iyo dulqaadka
Dhumucda (mm) | U dulqaadashada dhumucda (±mm ama % dhumucda) | Dulqaad ballaaran ± mm | |
Ballaca ≤320mm | 320mm≤Balac≤610mm | ||
0.10 | 0.008 | 0.5 | |
0.10-0.15 | 0.010 | 0.5 | |
0.15-0.30 | 0.010 | 0.5 | |
0.30-0.40 | 0.015 | 0.037 | 1.6 |
0.40-0.60 | 0.020 | 0.050 | 1.6 |
0.60-0.80 | 0.030 | 0.065 | 1.6 |
0.80-1.00 | 0.035 | 0.080 | 1.6 |
1.00-2.50 | 0.040 | 0.100 | 2.0 |
2.50-6.00 | 0.060 | 4% | 2.0 |
6.00-12.70 | 5% | 2.0 |
Dulqaadka dhererka: dulqaadka dhererka dhererka xaashida ilaa 1000mm ugu badnaan +5/-0 mm.
Flatness:max.4% (cabbirka habraaca ku salaysan ASTM B708)
Cufnaanta: ≥16.6g/cm³
Engegnaanta Vicker: Dhumucdiisuna waxay≥0.15mm: ≤125HV
Tijaabada xamaasada:
Dhumucda(mm) | Xoogga JilicsanMin. (MPa) | 0.2% xoogga wax soo saarkaMin.(MPa) | DheerayntaUgu yaraan (%) |
0.10-0.15 | 250 | 180 | 15 |
0.15-1.50 | 230 | 160 | 20 |
1.50-12.70 | 225 | 140 | 30 |
Muuqashada: Maaddadu waxay noqon doontaa mid tayo leh, oo ka nadiif ah walxo shisheeye, dillaac iyo jab.
Halkan ku qor fariintaada oo noo soo dir