Electropolishing molybdenum hlau.
Tshuaj muaj pes tsawg leeg:
Main thiab me Cheebtsam | Cov ntsiab lus tsawg (%) |
Mo | 99.97 ib |
Cov impurities | Qhov siab tshaj plaws (μg / g) |
Al | 10 |
Cu | 20 |
Cr | 20 |
Fe | 20 |
K | 20 |
Ni | 10 |
Si | 20 |
W | 300 |
C | 30 |
H | 10 |
N | 10 |
O | 40 |
Cd | 5 |
Hg | 1 |
Pb | 5 |
Dimensions thiab tolerances:
Txoj kab uas hla (mm) | φ-Kev kam rau siab (%) | Max.value tawm ntawm roundness |
0.30-0.79 Nws | ± 2.0 | Nyob rau hauvφ-Tolerance |
0.80-1.49 Nws | ± 1.5 | 0.010 hli |
1.50-3.99 Nws | ± 1.0 | 0.025 hli |
4.00-10.00 Nws | ± 1.0 | 0.050 hli |
Physical thiab mechanical khoom khoom:
Txoj kab uas hla (mm) | Tensile zog (MPa) |
0.30-0.49 dr hab | 1000-1300 Nws |
0.50-0.79 Nws | 800-1200 Nws |
0.80-1.49 Nws | 750-1100 Nws |
1.50-3.99 Nws | 650-1000 Nws |
4.00-10.00 Nws | 600 |
Elongation: ≥10%
Qhov ceev: 10.2g / cm³
Kev kuaj tsis muaj kev puas tsuaj: 100% Eddy tam sim no kuaj, faib tus nqi max. 0.5%
Nto:
1.0.30-1.00mm Electropolished (ci ntsa iab)
2.0.30-1.00mm Tshuaj ntxuav (hlau npub nto)
Sau koj cov lus ntawm no thiab xa tuaj rau peb