I-Tungsten Plate
Ukwakheka kwamakhemikhali:
| Izingxenye eziyinhloko nezincane | Okuqukethwe okuncane(%) | I-ASTM B760 |
| W | 99.97 | ibhalansi |
| Ukungcola | Amanani aphezulu (μg/g) | Amanani aphezulu (μg/g) |
| Al | 15 | - |
| Cu | 10 | - |
| Cr | 20 | - |
| Fe | 30 | 100 |
| K | 10 | - |
| Ni | 20 | 100 |
| Si | 20 | 100 |
| Mo | 300 | - |
| C | 30 | 100 |
| H | 5 | - |
| N | 5 | 100 |
| O | 20 | 100 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Ubukhulu nokubekezelela:
Amashidi agoqiwe abandayo
| Ubukhulu(mm) | Ukubekezelela ukuqina(±mm) | ||
| Ububanzi≤200mm | Ubukhulu obukhulu 510mm | Ukubekezelela ububanzi(±mm) | |
| 0.025 | 0.003 | ||
| 0.025-0.03 | 0.004 | 0.5 | |
| 0.03-0.04 | 0.005 | 0.5 | |
| 0.04-0.05 | 0.006 | 0.5 | |
| 0.05-0.06 | 0.008 | 0.5 | |
| 0.06-0.08 | 0.010 | 0.5 | |
| 0.08-0.10 | 0.015 | 0.5 | |
| 0.10-0.15 | 0.025 | 0.045 | 0.5 |
| 0.15-0.30 | 0.035 | 0.060 | 1.0 |
| 0.30-0.40 | 0.05 | 0.085 | 1.6 |
| 0.40-0,50 | 0.06 | 0.110 | 1.6 |
Amashidi afakwe emanzini ashisayo
| Ubukhulu(mm) | Ukubekezelela ukuqina(±mm) | ||
| Ububanzi≤510mm | I-Max.width 1200(mm) | Ukubekezelela ububanzi(±mm) | |
| 0.05-0.60 | 0.110 | 1.6 | |
| 0.60-0.80 | 0.140 | 2.0 | |
| 0.08-1.00 | 0.200 | 2.0 | |
| 1.00-2.00 | 0.250 | 2.0 | |
| 2.00-8.00 | 0.300 | 2.0 | |
| 8.0-20.00 | 5% | 5% | 2.0 |
Ukubekezelela ubude: ukubekezelela ubude kuzo zonke izilinganiso kuphezulu +5/-0 mm.
Ukucaba: max. 4% (inqubo yokulinganisa ngesisekelo se-ASTM B760)
Ukuminyana: ukujiya ＜10.00mm ukuminyana＞19.2g/cm³
ubukhulu (10.00-20.00mm) ukuminyana = 19.1g/cm³
Ukuqina kwe-Vickers:
≤0.10 mm ≥550 HV
0.10-0.05 mm ≥500 HV
0.50-1.50mm ≥470 HV
1.50-10.00mm ≥450 HV
10.00-20.00mm ≥420 HV
Ukubukeka: Impahla izoba yikhwalithi efanayo, ingenayo indaba yangaphandle, ukuhlukana nokuphuka.
Ishidi lombhede (lingasikiwe) lingase libe nemifantu emincane emaphethelweni.
Ikhwalithi yobuso:
Ukubanda kugoqeke ≤ 0.30mm ngokugqamile
Okubandayo kugoqwe ngo-0.3-0.5 mm okufakwe emanzini
Okushisayo kugoqwe ≥0.50 mm okufakwe emanzini anosawoti
