Tungsten Awo
Àkópọ̀ kẹ́míkà:
| Akọkọ ati kekere irinše | Min.akoonu(%) | ASTM B760 |
| W | 99.97 | iwontunwonsi |
| Awọn idoti | Awọn iye ti o pọju (μg/g) | Awọn iye ti o pọju (μg/g) |
| Al | 15 | - |
| Cu | 10 | - |
| Cr | 20 | - |
| Fe | 30 | 100 |
| K | 10 | - |
| Ni | 20 | 100 |
| Si | 20 | 100 |
| Mo | 300 | - |
| C | 30 | 100 |
| H | 5 | - |
| N | 5 | 100 |
| O | 20 | 100 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Awọn iwọn ati awọn ifarada:
Tutu ti yiyi sheets
| Sisanra(mm) | Ifarada sisanra (± mm) | ||
| Iwọn≤200mm | Max.iwọn 510mm | Ifarada iwọn (± mm) | |
| 0.025 | 0.003 | ||
| 0.025-0.03 | 0.004 | 0.5 | |
| 0.03-0.04 | 0.005 | 0.5 | |
| 0.04-0.05 | 0.006 | 0.5 | |
| 0.05-0.06 | 0.008 | 0.5 | |
| 0.06-0.08 | 0.010 | 0.5 | |
| 0.08-0.10 | 0.015 | 0.5 | |
| 0.10-0.15 | 0.025 | 0.045 | 0.5 |
| 0.15-0.30 | 0.035 | 0.060 | 1.0 |
| 0.30-0.40 | 0.05 | 0.085 | 1.6 |
| 0.40-0.50 | 0.06 | 0.110 | 1.6 |
Gbona rooled sheets
| Sisanra(mm) | Ifarada sisanra (± mm) | ||
| Iwọn≤510mm | Iwọn ti o pọju 1200 (mm) | Ifarada iwọn (± mm) | |
| 0.05-0.60 | 0.110 | 1.6 | |
| 0.60-0.80 | 0.140 | 2.0 | |
| 0.08-1.00 | 0.200 | 2.0 | |
| 1.00-2.00 | 0.250 | 2.0 | |
| 2.00-8.00 | 0.300 | 2.0 | |
| 8.0-20.00 | 5% | 5% | 2.0 |
Ifarada gigun: ifarada gigun fun gbogbo awọn iwọn jẹ iwọn + 5/-0 mm.
Fifẹ: max. 4% (ilana wiwọn lori ipilẹ ASTM B760)
iwuwo: sisanra 10.00mm iwuwo · 19.2g/cm³
sisanra (10.00-20.00mm) iwuwo; 19.1g/cm³
Vickers lile:
≤0.10 mm ≥550 HV
0.10-0.05 mm ≥500 HV
0.50-1.50mm ≥470 HV
1.50-10.00mm ≥450 HV
10.00-20.00mm ≥420 HV
Ifarahan: Awọn ohun elo yoo jẹ didara aṣọ, ti o ni ominira lati ọrọ ajeji, awọn pipin ati awọn fifọ.
Iwe ibusun (kii ṣe gige) le ni awọn dojuijako eti kekere.
Didara oju:
Tutu yiyi ≤ 0.30mm imọlẹ
Tutu ti yiyi 0.3-0.5 mm pickled
Gbona ti yiyi ≥0.50 mm pickled
Kọ ifiranṣẹ rẹ nibi ki o si fi si wa
