Molybdenum Ejò Alloy.
Àkópọ̀ kẹ́míkà:
| Akọkọ ati kekere irinše | Min.akoonu(%) |
| Mo | 67-73 |
| Cu | 27-33 |
| Awọn idoti | Awọn iye ti o pọju (μg/g) |
| Al | 10 |
| Cr | 20 |
| Fe | 20 |
| K | 20 |
| Ni | 10 |
| Si | 30 |
| W | 300 |
| C | 100 |
| H | 10 |
| N | 10 |
| O | 1000 |
| Sn | 10 |
| Sb | 20 |
| Sr | 10 |
| V | 10 |
| Cd | 5 |
| Hg | 1 |
| Pb | 5 |
Awọn ifarada sisanra ati iwọn:
| Tolerances pẹlu iwọn | Ifarada iwọn | |
| Sisanra(mm) | O pọju.400 mm± mm tabi% ti sisanra | [± mm] |
| 0.20-0.30 | 0.020 | 0.5 |
| 0.30-0.40 | 0.030 | 0.5 |
| 0.40-0.60 | 0.035 | 1.6 |
| 0.60-1.00 | 0.040 | 1.6 |
| 1.00-1.50 | 4% | 1.6 |
| 1.50-2.00 | 4% | 1.6 |
Ifarada gigun
Ifarada ipari fun gbogbo awọn iwọn ni o pọju + 5/-0 mm.
| Fifẹ | o pọju.4% (ilana wiwọn lori ipilẹ ASTM B386) |
| iwuwo | ≥ 9,7 g/cm³ |
| Gbona imugboroosi olùsọdipúpọ | ≤ 9,5 [10-6 × K-1] |
| Imudara igbona [λ ni 20°C] | 150 – 190 [W/mK] |
| Idaabobo itanna kan pato [ρ ni 20°C] | 0,040 [µΩm] |
| [E-Modulus ni 20°C] | 215 - 240 GPA |
| Vickers líle | ≥ 180 HV |
| Ifarahan | Ohun elo naa yoo jẹ didara aṣọ, laisi ọrọ ajeji, awọn pipin ati awọn fifọ.Awọn aṣọ ibusun (kii ṣe gige) le ni awọn dojuijako eti kekere. |
| Dada roughness | Tutu-yiyi, ilẹ:Ra≤1.5µm |
| Tutu-yiyi: Ra≤1.5µm |
Kọ ifiranṣẹ rẹ nibi ki o si fi si wa
