Wholesale Astm B386 Tzm Molybdenum Sheet /plate
It adheres on the tenet “Honest, industrious, enterprising, innovative” to acquire new solutions regularly. It regards shoppers, success as its very own success. Let us establish prosperous future hand in hand for Wholesale Astm B386 Tzm Molybdenum Sheet /plate, By more than 8 years of company, now we have accumulated rich experience and advanced technologies from the generation of our merchandise.
It adheres on the tenet “Honest, industrious, enterprising, innovative” to acquire new solutions regularly. It regards shoppers, success as its very own success. Let us establish prosperous future hand in hand for Astm B386 Moly Sheet/Plate, Heating Element Radiation Shield, Tzm Moly Sheet/Plate, Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need to have a trusted supplier and value information.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | Balance | balance |
Ti | 0.40-0.55% | 0.40-0.55% |
Zr | 0.06-0.12% | 0.06-0.12% |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 100-400 | 100-400- |
H | 10 | - |
N | 10 | 20 |
O | 500 | 300 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Cold rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.30-0.50 | 0.028 | 300 | 1.0 |
Hot rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.50-0.60 | 0.06 | 850 | 1.6 |
0.60-1.00 | 0.08 | 850 | 1.6 |
1.00-1.50 | 0.13 | 850 | 2.0 |
1.50-2.00 | 0.15 | 850 | 2.0 |
2.00-3.60 | 0.18 | 850 | 2.0 |
3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
0.30-1.00 | 700 | 600 | 5 |
1.00-2.50 | 700 | 600 | 10 |
2.50-5.00 | 700 | 600 | 12 |
5.00-20.00 | 650 | 600 | 10 |
20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.