Top Quality Tungsten Sheet Metal - Mo-Yt Ribbon – Forged Tungsten
Top Quality Tungsten Sheet Metal - Mo-Yt Ribbon – Forged Tungsten Detail:
Molybdenum ribbon
Chemical composition:
| Main and minor components | Min.content(%) |
| Mo | Balance |
| Y-Mixoxide | 0.47-0.60% |
| Impurities | Max.values (μg/g) |
| Al | 10 |
| Cu | 20 |
| Cr | 20 |
| Fe | 20 |
| K | 20 |
| Ni | 10 |
| Si | 20 |
| W | 300 |
| C | 30 |
| H | 10 |
| N | 10 |
| Cd | 5 |
| Hg | 1 |
| Pb | 5 |
Dimensions and tolerances:
Ribbon Length/Spool: ≥ 50 m / Spool
Ribbon Thickness: ≥ 50 g / Spool
Ribbon Thickness: 0.015-0.029 mm: +0.002/-0.003mm; 0.030-0.042 mm: +0.003/-0.004mm.
Ribbon Width:
1.5-2.99 mm: ±0.10 mm
3.00-4.99mm: ±0.20 mm
5.0-9.99mm: ±0.30 mm
10.00-20.00mm: ±0.50 mm
Edge Angle α5: ＜13o
Density: ≥10.1g/cm³
Tensile Strength: 750-1000MPa
Surface condition: The surface is dull and free of oxide layers and impurities that are visible to the naked eye. The final annealing is done in continuous furnaces under ruducing hydrogen atmosphere.
Appearance: The edges are free of defects such as kinks, splits ,ripples, twists or burrs.
Roughness: Ra≥0.15μm
Sagitta: Curvature of ribbon≤2mm/200mm.
Edge line: The fringing to the edge line may not exceed 40 μm to the middline.
Product detail pictures:
Related Product Guide:
Tunnel Transistor May Meet Power Needs of Future Chips | Tungsten Boats For Heating
H.C. Starck reports positive results across all divisions for 2017 | Rolled Molybdenum Foil
Often customer-oriented, and it's our ultimate target to become not only probably the most reputable, trustable and honest provider, but also the partner for our customers for Top Quality Tungsten Sheet Metal - Mo-Yt Ribbon – Forged Tungsten , The product will supply to all over the world, such as: Spain, Portugal, America, Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality products and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 5 years.
By Adela from Romania - 2018.06.30 17:29
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Mary from America - 2017.06.16 18:23
