Tantalum Sheet
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B386 (361) |
| Ta | 99.95 | balance |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Fe | 100 | 100 |
| Mo | 100 | 200 |
| Nb | 400 | 100 |
| Ni | 50 | 100 |
| Si | 50 | 50 |
| Ti | 50 | 100 |
| W | 100 | 500 |
| C | 30 | 200 |
| H | 15 | 15 |
| N | 50 | 100 |
| O | 100 | 250 |
| Cd | 10 | - |
| Hg | 10 | - |
| Pb | 10 | - |
Dimensions and toleraces
| Thickness (mm) | Thickness tolerance (±mm or % of the thickness） | Width tolerance±mm | |
| Width≤320mm | 320mm≤Width≤610mm | ||
| 0.10 | 0.008 | 0.5 | |
| 0.10-0.15 | 0.010 | 0.5 | |
| 0.15-0.30 | 0.010 | 0.5 | |
| 0.30-0.40 | 0.015 | 0.037 | 1.6 |
| 0.40-0.60 | 0.020 | 0.050 | 1.6 |
| 0.60-0.80 | 0.030 | 0.065 | 1.6 |
| 0.80-1.00 | 0.035 | 0.080 | 1.6 |
| 1.00-2.50 | 0.040 | 0.100 | 2.0 |
| 2.50-6.00 | 0.060 | 4% | 2.0 |
| 6.00-12.70 | 5% | 2.0 | |
Length tolerance:The length tolerance for sheet length up to 1000mm maximal +5/-0 mm.
Flatness:max.4% (measuring procedure on the basis of ASTM B708)
Density: ≥16.6g/cm³
Vicker hardness: Thickness≥0.15mm : ≤125HV
Tensile test:
| Thickness (mm) | Tensile Strength Min. (MPa) | 0.2% Yield strengt Min.(MPa) | Elongation Min.(%) |
| 0.10-0.15 | 250 | 180 | 15 |
| 0.15-1.50 | 230 | 160 | 20 |
| 1.50-12.70 | 225 | 140 | 30 |
Appearance:The material will be of uniform quality, free from foreign matter, splits and fractures.Bed sheets (not trimmed) may bave small edge cracks.
Write your message here and send it to us
