Reasonable price for Polish Finish Tungsten Plate - YL10.2 Ground Tungsten Carbide Rod High Strength Carbide Tube 0.15/0.2mm Hole – Forged Tungsten
Reasonable price for Polish Finish Tungsten Plate - YL10.2 Ground Tungsten Carbide Rod High Strength Carbide Tube 0.15/0.2mm Hole – Forged Tungsten Detail:
YL10.2 Ground Tungsten Carbide Rod High Strength Carbide Tube 0.15/0.2mm Hole
Tungsten Carbide Rod We offer:
- pressed and extruded unground, ground and polished rods with or without chamfers
- rod products that can be ground to h6 tolerances
- carbide rod with one or two parallel holes
- carbide rod with chamfer
- a variety of grades that provide exceptional wear and impact resistance
- grades for use in end mills, reamers, drills, countersinks, engraving tools, routers, and other rotary tools
- grades for use in a broad range of applications in almost any material
- grade for stamping /colding/ forging dies
We can supply all kinds of dimensions solid carbide rods with fine&sub micron grain size We manufactured and stocked many dimensions of ground and unground carbide rod for your. We have a large range of grade for your choice. We also can develop grade based on your application.
| Grade | YL10.2 (K25-K35) | |
| Co | % | 10 |
| WC | % | 90 |
| Density | g/cm3 | 14.5 |
| HV30 | kg/mm2 | 1600 |
| Hardness | HRA | 92.5-92.8 |
| Bending Strength | N/mm2 | >3800 |
| Porosity | A B C | A02B00C00 |
| WC Grain Size | μm | 0.6 |
Application of tools:
Twist drill,End mill,Tap
Applications of material:
◆ Cast iron
◆ Stainless steel,Heat-resistant steel,Hardened steel(hardness<60HRC)
◆ Nickel-based, Titanium alloys
Production Process of Tungsten Carbide Rod:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Various grade for your choice
| Grade | YL10.2 | YG6 | YG6X | YG10X | YG8 | YG15 |
| ISO Range | K25-K35 | K20 | K10 | K35 | K30 | K40-K50 |
| WC+others % | 90 | 94 | 94 | 90 | 92 | 85 |
| Co % | 10 | 6 | 6 | 10 | 8 | 15 |
| Grain Size μm | 0.6 | 0.8 | 0.6 | 0.6 | 0.8 | 0.8 |
| Density g/cm3 | 14.5 | 14.9 | 14.9 | 14.5 | 14.6 | 14.1 |
| Hardness HRA | 92.5-92.8 | 89.5 | 92 | 90 | 89 | 86.5 |
| T.R.S N/mm2 | 3800-4000 | 2150 | 2000 | 2200 | 2200 | 2400 |
| Grade | Application |
| YL10.2 | ultra-fine grain WC+ 10% Coblat, with good Wear resistance and Toughness, strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| YG6 | Fine Grain WC+6% Cobalt, with Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. |
| YG6X | ultra-fine grain size with cobalt 6%,with good wear resistance,Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron |
| YG10X | ultra-fine grain WC+ 10% Cobalt, suitable for small diameter Micro drill ,vertical milling cutter, rotating file |
| YG8 | fine GrainWC+ 8% Cobalt Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YG15 | fine grain WC +15% Cobalt for mining tools, cold heading and punching dies |
Production Advantages
1. we using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS 2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. With the HIP sintered technology,the structure of tungsten carbide is more uniform,more dense,the TRS can be raised more than 20%
7. We make tungsten carbide rods extruded or pressed.
8. Customization is acceped
Part of our carbide rod Size List
| D | DTol | d | dTol | L | Tol |
| mm | mm | mm | mm | mm | mm |
| 2.5 | +0.20～0.50 | 0.3 | ±0.05 | 330 | 0～+5.0 |
| 4.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 6.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 8.0 | +0.20～0.50 | 1.5 | ±0.05 | 330 | 0～+5.0 |
| 10.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 12.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 14.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 16.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 18.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 20.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 22.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 24.0 | +0.40～0.80 | 4.0 | ±0.05 | 330 | 0～+5.0 |
| 26.0 | +0.40～0.80 | 5.0 | ±0.05 | 330 | 0～+5.0 |
| 15 | +0.40～0.80 | 6 | +-0.5 | 550max | 0～+5.0 |
| 22 | +0.40～0.80 | 10 | +-0.5 | 550 max | 0～+5.0 |
| 25 | +0.40～0.80 | 12 | +-0.5 | 500 | 0～+5.0 |
We manufactured and stocked unground and ground carbide rods for you. For more size information, please kindly email or call us.
Our packing and shipping
Based on Detail products, we use different Standard packing suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or paper protection
3. Shipping:UPS,TNT,EMS,Fedex,DHL, shipment by sea, or as you request.
Product detail pictures:
Related Product Guide:
A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength | Pure Molybdenum Strip
2D molybdenum disulfide: a promising new optical material for ultra-fast photonics | Rolled Molybdenum Foil
We attempt for excellence, provider the customers", hopes to be the most beneficial cooperation team and dominator enterprise for staff, suppliers and shoppers, realizes value share and continuous advertising for Reasonable price for Polish Finish Tungsten Plate - YL10.2 Ground Tungsten Carbide Rod High Strength Carbide Tube 0.15/0.2mm Hole – Forged Tungsten , The product will supply to all over the world, such as: Ukraine, Atlanta, Sacramento, We'd like to invite customers from abroad to discuss business with us. We can provide our clients with high quality products and excellent service. We are sure that we will have good cooperative relationships and make a brilliant future for both parties.
By Dominic from Swiss - 2018.10.01 14:14
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Evangeline from Philadelphia - 2017.09.22 11:32
