China Professional China Pure Molybdenum Sheet Plate Manufacturer and Supplier

Professional China Pure Molybdenum Sheet Plate

Short Description:

Product Detail

Product Tags

We are going to dedicate ourselves to providing our esteemed buyers together with the most enthusiastically thoughtful products and services for Professional China Pure Molybdenum Sheet Plate, Since establishment during the early 1990s, now we have setup our sale network in USA, Germany, Asia, and several Middle Eastern countries. We purpose to generally be a top class supplier for worldwide OEM and aftermarket!
We are going to dedicate ourselves to providing our esteemed buyers together with the most enthusiastically thoughtful products and services for Molybdenum Plate, Molybdenum Sheet, Molybdenum Sheet/Plate, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We’re confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We’re looking forward to your inquiries.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
0.10	0.008	305	0.5
0.10-0.127	0.010	305	0.5
0.127-0.15	0.010	610	0.5
0.15-0.25	0.015	800	0.5
0.25-0.50	0.020	915	1.6
0.50-0.80	0.028	915	1.6
0.80-1.20	0.035	915	1.6
1.20-2.00	3%	915	1.6

Cold rooled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
1.00	0.080	850	2.0
1.00-1.50	0.130	850	2.0
1.50-2.00	0.150	850	2.0
2.00-3.60	0.180	1200	2.0
3.60-50.00	5%	1500	2.0

Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness＜0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: ＞200 HV
Tensile test:

Thickness(mm)	Tensile Srenght Min. (MPa)	0.2 % Yield strength Min. (MPa)	ElongationMin.(%)
0.1-0.25	700	620	2.0
0.25-0.40	680	590	3.0
0.40-0.65	680	590	5.0
0.65-1.50	680	580	10.0
1.50-2.30	640	580	12.0
2.30-5.00	640	580	15.0
5.00-10.00	640	580	10.0
10.00-13.00	590	540	10.0
13.00-25.00	500	480	2.0
25.00-50.00	500	480	1.0

Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	99.97	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	100
W	300	-
C	30	100
H	10	20
N	10	70
O	40	-
Cd	5	-
Hg	1	-
Pb	5	-