China Professional China Polished Molybdenum Rod Tzm Moly Rod/bar For Heating Furnace Manufacturer and Supplier

Professional China Polished Molybdenum Rod Tzm Moly Rod/bar For Heating Furnace

Short Description:

Product Detail

Product Tags

Our target is always to satisfy our customers by offering golden support, superior value and high quality for Professional China Polished Molybdenum Rod Tzm Moly Rod/bar For Heating Furnace, Sincerely hope we are rising up along with our shoppers everywhere in the world.
Our target is always to satisfy our customers by offering golden support, superior value and high quality for Heating Furnace, Molybdenum Rod /bar, Tzm Moly Rod, Due to our dedication, our items are well known throughout the world and our export volume continuously grows every year. We will continue to strive for excellence by providing high quality solutions that will exceed the expectation of our customers.
TZM rods
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	blance	balance
Ti	0.40-0.55%	0.40-0.55%
Zr	0.06-0.12%	0.06-0.12%
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	50
W	300	-
C	100-400	100-400
H	10	-
N	10	20
O	500	300
Cd	5	-
Hg	1	-
Pb	5	-

Dimensions and tolerances:

Diameter (mm)	Diameter tolerance (mm)
Ground
0.50-0.99	±0.007
1.00-1.99	±0.010
1.00-2.99	±0.015
3.00-15.9	±0.020
16.0-24.9	±0.030
25.0-34.9	±0.050
35.0-3939	±0.060
≥40.0	±0.20
Cleaned
0.50-4.0	±2.0%
4.10-10.0	±1.5%
15.0-50.0	±0.30
51.0-75.0	±0.40
75.1-120.0	±1.00
121.0-165.0	±1.50
Turned
40.0-49.9	±0.30
50.0-165.0	±0.40

Length and straightness:

Diameter (mm)	Production length (mm)	Stiraightness/Meter (mm)
Diameter (mm)	Production length (mm)	Cleaned	Ground/turned
0.50-0.99	＞500	＜2.5	＜2.5
1.00-9.90	＞300	＜2.0	＜1.5
10.0-165.0	＞100	＜1.5	＜1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.2	±0.3	±0.5	±0.8	±1.2	±2.0
Diameter ＞30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±1.0	±1.5	±2.5	±4.0	±6.0	±8.0

Density:
1. 0.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground.

Diameter(mm)	Tensile strength(MPa)	0.2% Yield Strength(MPa)	Elongation(%)	Hardness(HV 10)
0.50-4.76	-	-	-	-
4.76-22.20	≥790	≥690	≥18
22.20-28.60	≥760	≥655	≥15	260-320
28.60-47.60	≥690	≥585	≥10	250-310
47.60-73.00	≥620	≥550	≥10	245-300
73.00-120.9	≥585	≥515	≥5	240-290
121.0-165	≥585	≥515	≥5	220-280

Surface condition:

Surface：	Cleaned	Ground	Turned
	φ0.50-165mm	φ0.50-50.00mm	φ≥40.00mm
Roughness	Diameter (mm)	Ra (μm) Ground	Ra (μm) Turned
	≤2.50	≤0.80	-
	2.5-50.0	≤1.00	-
	≥40.0	-	≤3.2