OEM Supply Pure Molybdenum And Molybdenum Alloy Tzm/mola Products Customized For Vacuum Furnace

Short Description:


Product Detail

Product Tags

We always follow the principle “Quality Very first, Prestige Supreme”. We have been fully committed to delivering our customers with competitively priced high-quality products and solutions, prompt delivery and experienced services for OEM Supply Pure Molybdenum And Molybdenum Alloy Tzm/mola Products Customized For Vacuum Furnace, We welcome you to definitely be a part of us during this path of making a affluent and productive business enterprise together.
We always follow the principle “Quality Very first, Prestige Supreme”. We have been fully committed to delivering our customers with competitively priced high-quality products and solutions, prompt delivery and experienced services for Molybdenum Alloy Plates, Tzm Molybdenum Plates, Tzm Plates, Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer’s demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!
Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo Balance balance
Ti 0.40-0.55% 0.40-0.55%
Zr 0.06-0.12% 0.06-0.12%
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 100
W 300 -
C 100-400 100-400-
H 10 -
N 10 20
O 500 300
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Cold rolled sheets
Thickness(mm) Thickness tolerace(±mm) Maximal width(mm) Width tolerace(±mm)
0.30-0.50 0.028 300 1.0
Hot rolled sheets
Thickness(mm) Thickness tolerace(±mm) Maximal width(mm) Width tolerace(±mm)
0.50-0.60 0.06 850 1.6
0.60-1.00 0.08 850 1.6
1.00-1.50 0.13 850 2.0
1.50-2.00 0.15 850 2.0
2.00-3.60 0.18 850 2.0
3.60-50.0 5% 1000 2.0

Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:

Thickness (mm) Tensile StrengthMin. (MPa) 0.2% Yield strengtMin.(MPa) ElongationMin.(%)
0.30-1.00 700 600 5
1.00-2.50 700 600 10
2.50-5.00 700 600 12
5.00-20.00 650 600 10
20.00-50.00 550 470 5

Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.


  • Previous:
  • Next:

  • Write your message here and send it to us