China OEM Factory for Tantalum Sheet - Massive Selection for 99.95% Pure Mo Molybdenum Foil Sheet Plate – Forged Tungsten Manufacturer and Supplier

OEM Factory for Tantalum Sheet - Massive Selection for 99.95% Pure Mo Molybdenum Foil Sheet Plate – Forged Tungsten

Short Description:

Product Detail

Product Tags

Feedback (2)

All we do is always involved with our tenet " Consumer initial, Trust first, devoting within the food stuff packaging and environmental defense for Vacuum Tungsten Wire, Molybdenum Support Rod, Niobium Round Pipe, Besides, our enterprise sticks to high-quality and fair value, and we also offer you fantastic OEM solutions to several famous brands.

OEM Factory for Tantalum Sheet - Massive Selection for 99.95% Pure Mo Molybdenum Foil Sheet Plate – Forged Tungsten Detail:

Our well-equipped facilities and great excellent command throughout all stages of generation enables us to guarantee total customer fulfillment for Massive Selection for 99.95% Pure Mo Molybdenum Foil Sheet Plate, If needed, welcome to help make contact with us by our web page or cellphone consultation, we will be delighted to serve you.
Our well-equipped facilities and great excellent command throughout all stages of generation enables us to guarantee total customer fulfillment for Molybdenum, Molybdenum Mo Plate, Molybdenum Mo Sheet, We always insist on the principle of “Quality and service are the life of the product”. Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
0.10	0.008	305	0.5
0.10-0.127	0.010	305	0.5
0.127-0.15	0.010	610	0.5
0.15-0.25	0.015	800	0.5
0.25-0.50	0.020	915	1.6
0.50-0.80	0.028	915	1.6
0.80-1.20	0.035	915	1.6
1.20-2.00	3%	915	1.6

Cold rooled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
1.00	0.080	850	2.0
1.00-1.50	0.130	850	2.0
1.50-2.00	0.150	850	2.0
2.00-3.60	0.180	1200	2.0
3.60-50.00	5%	1500	2.0

Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness＜0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: ＞200 HV
Tensile test:

Thickness(mm)	Tensile Srenght Min. (MPa)	0.2 % Yield strength Min. (MPa)	ElongationMin.(%)
0.1-0.25	700	620	2.0
0.25-0.40	680	590	3.0
0.40-0.65	680	590	5.0
0.65-1.50	680	580	10.0
1.50-2.30	640	580	12.0
2.30-5.00	640	580	15.0
5.00-10.00	640	580	10.0
10.00-13.00	590	540	10.0
13.00-25.00	500	480	2.0
25.00-50.00	500	480	1.0

Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	99.97	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	100
W	300	-
C	30	100
H	10	20
N	10	70
O	40	-
Cd	5	-
Hg	1	-
Pb	5	-

Product detail pictures:

Related Product Guide:
Our favorite recipes with tomato sauce | Food and cooking | Slivery Color Molybdenum Sheet /Plate
ECPs Share their Best-Selling Collections for March | Niobium Carbide Alloy Powder

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for OEM Factory for Tantalum Sheet - Massive Selection for 99.95% Pure Mo Molybdenum Foil Sheet Plate – Forged Tungsten , The product will supply to all over the world, such as: Kuwait, Detroit, Swedish, We guarantee that our company will try our best to reduce customer purchase cost , shorten the period of purchase , stable products quality , increase customers' satisfaction and achieve win-win situation .

99.95% Molybdenum Heat Shield

Molybdenum Refractory Foil

Supply Cleaning Molybdenum Strip Foil

Tantalum Crucible/Boat

Tantalum Plate

Tungsten Carbide Pipe

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.