China OEM Customized Extruded Tungsten Carbide Round Rods With Iso Standard Manufacturer and Supplier

OEM Customized Extruded Tungsten Carbide Round Rods With Iso Standard

Short Description:

Product Detail

Product Tags

We constantly think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as living for OEM Customized Extruded Tungsten Carbide Round Rods With Iso Standard, At present, corporation name has much more than 4000 kinds of products and gained very good status and big shares on current market domestic and abroad.
We constantly think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as living for Extruded Tungsten Carbide Round Rod, Tungsten Carbide Rods, Tungsten Carbide Rods With Iso Standard, If you need to have any of our merchandise, or have other items to be produced, make sure you send us your inquiries, samples or in depth drawings. Meanwhile, aiming to develop into an international enterprise group, we look forward to receiving offers for joint ventures and other cooperative projects.
Chemical composition:

Main and minor components	Min.content(%)	ASTM B760
W	99.95	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	15	-
Cu	10	-
Cr	20	-
Fe	30	100
K	10	-
Ni	20	100
Si	20	100
Mo	100	-
C	30	100
H	5	-
N	5	100
O	20	100
Cd	5	-
Hg	1	-
Pb	5	-

Diameter and tolerances:

Diameter (mm)	Tolerance
	Straightened	Forged	Turned	Ground
0.50-0.99	-	-		±0.007
1.00-1.99	-	-		±0.010
2.00-2.99	±2.0 %	-		±0.015
3.00-15.9	-	-		±0.020
16.0-24.9	-	±0.30		±0.030
25.0-34.9	-	±0.40		±0.050
35.0-39.9	-	±0.40	±0.30	±0.060
40.0-49.9	-	±0.40	±0.30	±0.20
50.0-90.0	-	±1.00	±0.40	-

Length and straightness:

Diameter (mm)	Production length (mm)	Stiraightness/Meter (mm)
Diameter (mm)	Production length (mm)	Cleaned	Ground/turned
0.50-10.0	≥500	＜2.5	＜2.5
10.1-50.0	≥300	＜2.0	＜1.5
50.1-90.0	≥100	＜2.0	＜1.5

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm)	≥15	15-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.2	±0.3	±0.5	±2.0	±3.0	±4.0
Diameter ＞30.0 mm
Nominal length (mm)	≥30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.5	±0.8	±1.2	±4.0	±6.0	±8.0

Density: ≥19.1g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm)	Hardness (HV 10)
0.50-2.99	—
3.00-9.99	420-500
10.0-29.9	420-480
30.0-49.9	380-460
≥50	＞350

Surface condition:

Diameter (mm)	Surface condition
0.50-90.0	Chemical cleaned
≥40.0	Turned Ra ≤3.2μm
0.50-30	Centerless ground Ra≤1.0μm
≥40.0	- Centerless ground Ra≤1.2μm