Manufacturing Companies for Molybdenum Connecting Threaded Rod
It really is our responsibility to satisfy your requirements and competently serve you. Your fulfillment is our greatest reward. We’re on the lookout forward in your go to for joint progress for Manufacturing Companies for Molybdenum Connecting Threaded Rod, should you may have any query or wish to place an initial purchase be sure to never hesitate to contact us.
It really is our responsibility to satisfy your requirements and competently serve you. Your fulfillment is our greatest reward. We’re on the lookout forward in your go to for joint progress for Molybdenum Connecting Rod, Molybdenum Rod, Molybdenum Threaded Rod, We always insist on the management tenet of “Quality is first, Technology is basis, Honesty and Innovation”.We have been able to develop new products continuously to a higher level to satisfy different needs of customers.
Molybdenum rods Chemical composition:
| Main and minor components | Min.content(%) | ASTM B386 (361) |
| Mo | 99.95 | balance |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 10 | - |
| Cu | 20 | - |
| Cr | 20 | - |
| Fe | 20 | 100 |
| K | 20 | - |
| Ni | 10 | 50 |
| Si | 20 | 100 |
| W | 300 | - |
| C | 30 | 100 |
| H | 10 | 20 |
| N | 10 | 70 |
| O | 40 | - |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
| Diameter (mm) | Diameter tolerance (mm) |
| Ground | |
| 0.50-0.99 | ±0.007 |
| 1.00-1.99 | ±0.010 |
| 1.00-2.99 | ±0.015 |
| 3.00-15.9 | ±0.020 |
| 16.0-24.9 | ±0.030 |
| 25.0-34.9 | ±0.050 |
| 35.0-3939 | ±0.060 |
| ≥40.0 | ±0.20 |
| Cleaned | |
| 0.50-4.0 | ±2.0% |
| 4.10-10.0 | ±1.5% |
| 15.0-50.0 | ±0.30 |
| 51.0-75.0 | ±0.40 |
| 75.1-120.0 | ±1.00 |
| 121.0-165.0 | ±1.50 |
| Turned | |
| 40.0-49.9 | ±0.30 |
| 50.0-165.0 | ±0.40 |
Length and straightness:
| Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
| Cleaned | Ground/turned | ||
| 0.50-0.99 | ＞500 | ＜2.5 | ＜2.5 |
| 1.00-9.90 | ＞300 | ＜2.0 | ＜1.5 |
| 10.0-165.0 | ＞100 | ＜1.5 | ＜1.0 |
Length tolerance:
| Diameter 0.50-30.0 mm | ||||||
| Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2.0 |
| Diameter ＞30.0 mm | ||||||
| Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±1.0 | ±1.5 | ±2.5 | ±4.0 | ±6.0 | ±8.0 |
Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
| Diameter(mm) | Tensile strength(MPa) | 0.2% Yield Strength(MPa) | Elongation(%) | Hardness(HV 10) |
| 0.50-3.18 | ≥585 | ≥450 | ≥15 | |
| 3.18-10.30 | ≥515 | ≥380 | ≥15 | |
| 10.32-22.20 | ≥620 | ≥515 | ≥18 | 230-280 |
| 22.20-28.60 | ≥585 | ≥480 | ≥15 | 225-270 |
| 28.60-47.60 | ≥515 | ≥450 | ≥10 | 215-260 |
| 47.60-73.00 | ≥480 | ≥415 | ≥10 | 210-250 |
| 73.00-88.90 | ≥450 | ≥380 | ≥10 | 205-240 |
| 89.00-120.9 | ≥450 | ≥380 | ≥5 | 200-240 |
| 121.0-164.9 | ≥450 | ≥380 | ≥5 | 180-240 |
| 165.0 | ≥450 | ≥380 | ≥- | 180-240 |
Surface condition:
| Surface： | Cleaned | Ground | Turned |
| φ0.50-165mm | φ0.50-50.00mm | φ≥40.00mm | |
| Roughness | Diameter (mm) | Ra (μm) Ground | Ra (μm) Turned |
| ≤2.50 | ≤0.80 | - | |
| 2.5-50.0 | ≤1.00 | - | |
| ≥40.0 | - | ≤3.2 |
