Manufacturer for Tungsten Carbide Rods And Drill Bits For Metal Drilling

Short Description:


Product Detail

Product Tags

We have by far the most highly developed manufacturing equipment, experienced and qualified engineers and workers, regarded high quality handle systems along with a friendly qualified revenue team pre/after-sales support for Manufacturer for Tungsten Carbide Rods And Drill Bits For Metal Drilling, Special emphasis around the packaging of merchandise to avoid any damage during transportation,Detailed interest into the useful feedback and strategies of our esteemed shoppers.
We have by far the most highly developed manufacturing equipment, experienced and qualified engineers and workers, regarded high quality handle systems along with a friendly qualified revenue team pre/after-sales support for Metal Drilling Bits, Tungsten Carbide Drill Bits, Tungsten Carbide Rods, For many years, we have now adhered to the principle of customer oriented, quality based, excellence pursuing, mutual benefit sharing. We hope, with great sincerity and good will, to have the honor to help with your further market.
Chemical composition:

Main and minor components Min.content(%) ASTM B760
W 99.95 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 15 -
Cu 10 -
Cr 20 -
Fe 30 100
K 10 -
Ni 20 100
Si 20 100
Mo 100 -
C 30 100
H 5 -
N 5 100
O 20 100
Cd 5 -
Hg 1 -
Pb 5 -

Diameter and tolerances:

Diameter (mm) Tolerance
  Straightened Forged Turned Ground
0.50-0.99 - -   ±0.007
1.00-1.99 - -   ±0.010
2.00-2.99 ±2.0 % -   ±0.015
3.00-15.9 - -   ±0.020
16.0-24.9 - ±0.30   ±0.030
25.0-34.9 - ±0.40   ±0.050
35.0-39.9 - ±0.40 ±0.30 ±0.060
40.0-49.9 - ±0.40 ±0.30 ±0.20
50.0-90.0 - ±1.00 ±0.40 -

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-10.0 ≥500 <2.5 <2.5
10.1-50.0 ≥300 <2.0 <1.5
50.1-90.0 ≥100 <2.0 <1.5

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) ≥15 15-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±2.0 ±3.0 ±4.0
Diameter >30.0 mm
Nominal length (mm) ≥30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.5 ±0.8 ±1.2 ±4.0 ±6.0 ±8.0

Density: ≥19.1g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm) Hardness (HV 10)
0.50-2.99
3.00-9.99 420-500
10.0-29.9 420-480
30.0-49.9 380-460
≥50 >350

Surface condition:

Diameter (mm) Surface condition
0.50-90.0 Chemical cleaned
≥40.0 Turned Ra ≤3.2μm
0.50-30 Centerless ground Ra≤1.0μm
≥40.0 - Centerless ground Ra≤1.2μm

  • Previous:
  • Next:

  • Write your message here and send it to us