China Manufacturer for Molybdenum Piercing Mandrel - High Quality for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods – Forged Tungsten Manufacturer and Supplier

Manufacturer for Molybdenum Piercing Mandrel - High Quality for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods – Forged Tungsten

Short Description:

Product Detail

Product Tags

Feedback (2)

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Niobium Bar, Tungsten Lock Nuts, Tungsten Carbide Sheet Metal, We welcome shoppers, business enterprise associations and close friends from all sections with the globe to contact us and seek cooperation for mutual added benefits.

Manufacturer for Molybdenum Piercing Mandrel - High Quality for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods – Forged Tungsten Detail:

Sticking for the basic principle of “Super Top quality, Satisfactory service” ,We’ve been striving to be an excellent business enterprise partner of you for High Quality for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods, We glance ahead to receiving your enquires quickly and hope to have the chance to operate together with you inside the future. Welcome to just take a seem at our organization.
Sticking for the basic principle of “Super Top quality, Satisfactory service” ,We’ve been striving to be an excellent business enterprise partner of you for Molybdenum Alloy Rod, Molybdenum And Zirconium Titanium Alloy Rod, Tzm Molybdenum Rod, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products we offer, effective and satisfying consultation service is supplied by our specialist after-sale service group. Solution lists and detailed parameters and any other info weil be sent to you timely for the inquiries. So please get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We’re confident that we are going to share mutual results and build solid co-operation relations with our companions in this market. We’re looking forward to your inquiries.
TZM rods
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	blance	balance
Ti	0.40-0.55%	0.40-0.55%
Zr	0.06-0.12%	0.06-0.12%
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	50
W	300	-
C	100-400	100-400
H	10	-
N	10	20
O	500	300
Cd	5	-
Hg	1	-
Pb	5	-

Dimensions and tolerances:

Diameter (mm)	Diameter tolerance (mm)
Ground
0.50-0.99	±0.007
1.00-1.99	±0.010
1.00-2.99	±0.015
3.00-15.9	±0.020
16.0-24.9	±0.030
25.0-34.9	±0.050
35.0-3939	±0.060
≥40.0	±0.20
Cleaned
0.50-4.0	±2.0%
4.10-10.0	±1.5%
15.0-50.0	±0.30
51.0-75.0	±0.40
75.1-120.0	±1.00
121.0-165.0	±1.50
Turned
40.0-49.9	±0.30
50.0-165.0	±0.40

Length and straightness:

Diameter (mm)	Production length (mm)	Stiraightness/Meter (mm)
Diameter (mm)	Production length (mm)	Cleaned	Ground/turned
0.50-0.99	＞500	＜2.5	＜2.5
1.00-9.90	＞300	＜2.0	＜1.5
10.0-165.0	＞100	＜1.5	＜1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.2	±0.3	±0.5	±0.8	±1.2	±2.0
Diameter ＞30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±1.0	±1.5	±2.5	±4.0	±6.0	±8.0

Density:
1. 0.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground.

Diameter(mm)	Tensile strength(MPa)	0.2% Yield Strength(MPa)	Elongation(%)	Hardness(HV 10)
0.50-4.76	-	-	-	-
4.76-22.20	≥790	≥690	≥18
22.20-28.60	≥760	≥655	≥15	260-320
28.60-47.60	≥690	≥585	≥10	250-310
47.60-73.00	≥620	≥550	≥10	245-300
73.00-120.9	≥585	≥515	≥5	240-290
121.0-165	≥585	≥515	≥5	220-280

Surface condition:

Surface：	Cleaned	Ground	Turned
	φ0.50-165mm	φ0.50-50.00mm	φ≥40.00mm
Roughness	Diameter (mm)	Ra (μm) Ground	Ra (μm) Turned
	≤2.50	≤0.80	-
	2.5-50.0	≤1.00	-
	≥40.0	-	≤3.2

Product detail pictures:

Related Product Guide:
Tungsten Diselenide Is New 2-D Optoelectronic Wonder Material | Niobium Carbide Alloy Powder
The Hardest Superconducting Metal Nitride | Niobium Carbide Alloy Powder

The organization keeps on the procedure concept "scientific management, high quality and efficiency primacy, purchaser supreme for Manufacturer for Molybdenum Piercing Mandrel - High Quality for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods – Forged Tungsten , The product will supply to all over the world, such as: Australia, Swiss, Tajikistan, Our domestic website's generated over 50, 000 purchasing orders every year and quite successful for internet shopping in Japan. We would be happy to have an opportunity to do business with your company. Looking forward to receiving your message !

High Purity Tantalum Tube

Molybdenum Rod For Support Led

Niobium Coating Rod

Pure Molybdenum Sheet

Pure Tungsten Tubes

Tungsten Cutting Wire

This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.

By Michaelia from Estonia - 2018.12.14 15:26

The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!

By Alexandra from Hamburg - 2017.08.21 14:13

Write your message here and send it to us