Tantalum Rod
Ngwakọta kemịkalụ:
| Isi na obere akụrụngwa | Min. ọdịnaya(%) | ASTM B365 |
| Ta | 99.95 | itule |
| Ihe adịghị ọcha | Uru kacha (μg/g) | Uru kacha (μg/g) |
| Fe | 100 | 100 |
| Mo | 100 | 200 |
| Nb | 400 | 1000 |
| Ni | 50 | 100 |
| Si | 50 | 50 |
| Ti | 50 | 100 |
| W | 100 | 500 |
| C | 30 | 200 |
| H | 15 | 15 |
| N | 50 | 100 |
| O | 100 | 250 |
| Cd | 10 | - |
| Hg | 1 | - |
| Pb | 10 | - |
Dayameta na ndidi
| Dayameta (mm) | Nkwenye dayameta (mm) |
| Ala | |
| 3.00-15.9 | ±0.05 |
| 16.0-24.9 | ±0.10 |
| 25.0-34.9 | ±0.25 |
| 35.0-39.9 | ±0.40 |
| 40.0-50.0 | ± 0,80 |
| kpochara | |
| 3.00-4.74 | ± 0.076 |
| 4.75-9.51 | ±0.102 |
| 9.52-12.69 | ±0.127 |
| 12.70-15.87 | ± 0.178 |
| 15.88-19.04 | ±0.203 |
| 19.05-25.39 | ±0.254 |
| 25.40-38.09 | ± 0.381 |
| 38.10-50.79 | ± 0,508 |
| 50.80-63.49 | ± 0,762 |
| 63.50-120.0 | ± 1.50 |
| tụgharịrị | |
| 30.0-49.9 | ±0.30 |
| 50.0-120.0 | ±0.40 |
Ogologo na ogologo:
| Dayameta (mm) | Ogologo mmepụta (mm) | Mkpebi/mita (mm) | |
| kpochara | Ala/atụgharị | ||
| 3.00-9.90 | 500 | 2.5 | 2.0 |
| 10.0-120.0 | 300 | 2.5 | 1.5 |
Nkwenye ogologo:
| Ogologo aha (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | 2000 |
| Nkwenye ogologo (mm) | ±1.0 | ±1.5 | ±2.5 | ±4.0 | ± 6.0 | ±8.0 |
Njupụta: ≥16.6g/cm³
Nnwale na-adịghị emebi emebi: Maka dayameta＞15.00 mm: 100% ultrasonic test; Maka dayameta nke 0.50-50.0mm: Eddy curent ule na mkpara nwere ala ala.
| Dayameta (mm) | Ike ọdụdọ(MPa) | 0.2% MpụtaIke(MPa) | Ogologo oge(%) |
| 3.00-3.19 | ≥207 | - | ≥20 |
| 3.20-63.5 | ≥172 | ≥103 | ≥25 |
Ọnọdụ ihu:
| Elu | pickled | Ala | tụgharịrị |
| φ3.0-165.0mm | 3.0-50.00mm | φ≥30.00mm | |
| Isi ike | Dayameta (mm) | Ra (μm) Ala | Ra (μm) tụgharịrị |
| 3.0-50.0 | ≤1.20 | - | |
| ≥30.0 | - | ≤3.2 |
Dee ozi gị ebe a ziga anyị ya
