Electropolishing molybdenum waya.
Ngwakọta kemịkalụ:
| Isi na obere akụrụngwa | Min. ọdịnaya(%) |
| Mo | 99.97 |
| Ihe adịghị ọcha | Uru kacha (μg/g) |
| Al | 10 |
| Cu | 20 |
| Cr | 20 |
| Fe | 20 |
| K | 20 |
| Ni | 10 |
| Si | 20 |
| W | 300 |
| C | 30 |
| H | 10 |
| N | 10 |
| O | 40 |
| Cd | 5 |
| Hg | 1 |
| Pb | 5 |
Akụkụ na ndidi:
| Dayameta (mm) | φ- ndidi (%) | Oke.Uru esighị okirikiri |
| 0.30-0.79 | ±2.0 | N'ime φ- ndidi |
| 0.80-1.49 | ±1.5 | 0.010 mm |
| 1.50-3.99 | ±1.0 | 0.025 mm |
| 4.00-10.0 | ±1.0 | 0.050 mm |
Njirimara ngwaahịa anụ ahụ na igwe:
| Dayameta (mm) | Ike tensile (MPa) |
| 0.30-0.49 | 1000-1300 |
| 0.50-0.79 | 800-1200 |
| 0.80-1.49 | 750-1100 |
| 1.50-3.99 | 650-1000 |
| 4.00-10.0 | 600 |
Mgbatị: ≥10%
Njupụta: 10.2g/cm³
Nnwale ndị na-adịghị emebi emebi: 100% Eddy ugbu a ule, uru kewaa max. 0.5%
Elu:
1.0.30-1.00mm Electropolished (elu na-egbuke egbuke)
2.0.30-1.00mm kemịkalụ kpochara (igwe dull elu)
Dee ozi gị ebe a ziga anyị ya
