Hot-selling Tzm Plate Molybdenum Thin Plate Molybdenum Parts For Coated Glass
It really is our obligation to satisfy your requirements and efficiently serve you. Your fulfillment is our greatest reward. We’re hunting forward to your check out for joint development for Hot-selling Tzm Plate Molybdenum Thin Plate Molybdenum Parts For Coated Glass, We generally keep on with the principle of “Integrity, Efficiency, Innovation and Win-Win business”. Welcome to visit our website and do not hesitate to communicate with us. Are you completely ready? ? ? Let us go!!!
It really is our obligation to satisfy your requirements and efficiently serve you. Your fulfillment is our greatest reward. We’re hunting forward to your check out for joint development for Molybdenum Parts, Molybdenum Thin Plate, Tzm Plate, Now we have won a good reputation among overseas and domestic clients. Adhering to the management tenet of “credit oriented, customer first, high efficiency and mature services”, we warmly welcome friends from all walks of life to cooperate with us.
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B386 (361) |
| Mo | Balance | balance |
| Ti | 0.40-0.55% | 0.40-0.55% |
| Zr | 0.06-0.12% | 0.06-0.12% |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 10 | - |
| Cu | 20 | - |
| Cr | 20 | - |
| Fe | 20 | 100 |
| K | 20 | - |
| Ni | 10 | 50 |
| Si | 20 | 100 |
| W | 300 | - |
| C | 100-400 | 100-400- |
| H | 10 | - |
| N | 10 | 20 |
| O | 500 | 300 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
| Cold rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.30-0.50 | 0.028 | 300 | 1.0 |
| Hot rolled sheets | |||
| Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
| 0.50-0.60 | 0.06 | 850 | 1.6 |
| 0.60-1.00 | 0.08 | 850 | 1.6 |
| 1.00-1.50 | 0.13 | 850 | 2.0 |
| 1.50-2.00 | 0.15 | 850 | 2.0 |
| 2.00-3.60 | 0.18 | 850 | 2.0 |
| 3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
| Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
| 0.30-1.00 | 700 | 600 | 5 |
| 1.00-2.50 | 700 | 600 | 10 |
| 2.50-5.00 | 700 | 600 | 12 |
| 5.00-20.00 | 650 | 600 | 10 |
| 20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.
