Hot Sale for Pure Low Molybdenum Bar Made In Baoji Yunjie
We insist on offering high quality creation with fantastic small business concept, honest gross sales plus the best and fast assistance. it will bring you not only the high quality solution and huge profit, but one of the most significant is to occupy the endless market for Hot Sale for Pure Low Molybdenum Bar Made In Baoji Yunjie, Customer fulfillment is our main target. We welcome you to definitely set up small business relation with us. For more info, you should will not wait to get hold of with us.
We insist on offering high quality creation with fantastic small business concept, honest gross sales plus the best and fast assistance. it will bring you not only the high quality solution and huge profit, but one of the most significant is to occupy the endless market for Molybdenum And Molybdenum Alloy Rod Bar Tube For Sale, Molybdenum And Molybdenum Alloy Round Rod Or Flat Bar, Standard Square Bar, With the aim of “compete with good quality and develop with creativity” and the service principle of “take customers’ demand as orientation”, we will earnestly give qualified solutions and good service for domestic and international customers.
Molybdenum rods Chemical composition:
| Main and minor components | Min.content(%) | ASTM B386 (361) |
| Mo | 99.95 | balance |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 10 | - |
| Cu | 20 | - |
| Cr | 20 | - |
| Fe | 20 | 100 |
| K | 20 | - |
| Ni | 10 | 50 |
| Si | 20 | 100 |
| W | 300 | - |
| C | 30 | 100 |
| H | 10 | 20 |
| N | 10 | 70 |
| O | 40 | - |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
| Diameter (mm) | Diameter tolerance (mm) |
| Ground | |
| 0.50-0.99 | ±0.007 |
| 1.00-1.99 | ±0.010 |
| 1.00-2.99 | ±0.015 |
| 3.00-15.9 | ±0.020 |
| 16.0-24.9 | ±0.030 |
| 25.0-34.9 | ±0.050 |
| 35.0-3939 | ±0.060 |
| ≥40.0 | ±0.20 |
| Cleaned | |
| 0.50-4.0 | ±2.0% |
| 4.10-10.0 | ±1.5% |
| 15.0-50.0 | ±0.30 |
| 51.0-75.0 | ±0.40 |
| 75.1-120.0 | ±1.00 |
| 121.0-165.0 | ±1.50 |
| Turned | |
| 40.0-49.9 | ±0.30 |
| 50.0-165.0 | ±0.40 |
Length and straightness:
| Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
| Cleaned | Ground/turned | ||
| 0.50-0.99 | ＞500 | ＜2.5 | ＜2.5 |
| 1.00-9.90 | ＞300 | ＜2.0 | ＜1.5 |
| 10.0-165.0 | ＞100 | ＜1.5 | ＜1.0 |
Length tolerance:
| Diameter 0.50-30.0 mm | ||||||
| Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2.0 |
| Diameter ＞30.0 mm | ||||||
| Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±1.0 | ±1.5 | ±2.5 | ±4.0 | ±6.0 | ±8.0 |
Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
| Diameter(mm) | Tensile strength(MPa) | 0.2% Yield Strength(MPa) | Elongation(%) | Hardness(HV 10) |
| 0.50-3.18 | ≥585 | ≥450 | ≥15 | |
| 3.18-10.30 | ≥515 | ≥380 | ≥15 | |
| 10.32-22.20 | ≥620 | ≥515 | ≥18 | 230-280 |
| 22.20-28.60 | ≥585 | ≥480 | ≥15 | 225-270 |
| 28.60-47.60 | ≥515 | ≥450 | ≥10 | 215-260 |
| 47.60-73.00 | ≥480 | ≥415 | ≥10 | 210-250 |
| 73.00-88.90 | ≥450 | ≥380 | ≥10 | 205-240 |
| 89.00-120.9 | ≥450 | ≥380 | ≥5 | 200-240 |
| 121.0-164.9 | ≥450 | ≥380 | ≥5 | 180-240 |
| 165.0 | ≥450 | ≥380 | ≥- | 180-240 |
Surface condition:
| Surface： | Cleaned | Ground | Turned |
| φ0.50-165mm | φ0.50-50.00mm | φ≥40.00mm | |
| Roughness | Diameter (mm) | Ra (μm) Ground | Ra (μm) Turned |
| ≤2.50 | ≤0.80 | - | |
| 2.5-50.0 | ≤1.00 | - | |
| ≥40.0 | - | ≤3.2 |
