Tungsten qws
Tshuaj muaj pes tsawg leeg:
Main thiab me Cheebtsam | Cov ntsiab lus tsawg (%) | ASTM B760 Cov Lus Qhia Tshwj Xeeb |
W | 99.95 ib | tshuav nyiaj li cas |
Cov impurities | Qhov siab tshaj plaws (μg / g) | Qhov siab tshaj plaws (μg / g) |
Al | 15 | - |
Cu | 10 | - |
Cr | 20 | - |
Fe | 30 | 100 |
K | 10 | - |
Ni | 20 | 100 |
Si | 20 | 100 |
Mo | 100 | - |
C | 30 | 100 |
H | 5 | - |
N | 5 | 100 |
O | 20 | 100 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Txoj kab uas hla thiab tolerances:
Txoj kab uas hla (mm) | Ua siab ntev | |||
Ncaj nraim | Forged | Tig | Hauv av | |
0.50-0.99 Nws | - | - | ± 0.007 | |
1.00-1.99 Nws | - | - | ± 0.010 | |
2.00-2.99 Nws | ± 2.0% | - | ± 0.015 | |
3.00-15.9 Nws | - | - | ± 0.020 | |
16.0-24.9 Nws | - | ± 0.30 | ± 0.030 | |
25.0-34.9 Nws | - | ± 0.40 | ± 0.050 | |
35.0-39.9 Nws | - | ± 0.40 | ± 0.30 | ± 0.060 |
40.0-49.9 Nws | - | ± 0.40 | ± 0.30 | ± 0.20 |
50.0-90.0 Nws | - | ± 1.00 | ± 0.40 | - |
Ntev thiab ncaj:
Txoj kab uas hla (mm) | Ntau lawm ntev (mm) | Stirightness / Meter (mm) | |
huv si | Hauv av / tig | ||
0.50-10.0 Nws | ≥500 | 2.5 | 2.5 |
10.1-50.0 Nws | ≥300 | 2.0 | 1.5 |
50.1-90.0 Nws | ≥100 | 2.0 | 1.5 |
Length kam rau ua:
Txoj kab uas hla 0.50-30.0 mm | ||||||
Nominal ntev (mm) | ≥15 | 15-120 : kuv | 120-400 Nws | 400-1000 Nws | 1000-2000 | > 2000 |
Length kam rau ua (mm) | ± 0.2 | ± 0.3 | ± 0.5 hli | ± 2.0 | ± 3.0 | ± 4.0 |
Ø 30.0 mm | ||||||
Nominal ntev (mm) | ≥30 | 30-120 Nws | 120-400 Nws | 400-1000 Nws | 1000-2000 | > 2000 |
Length kam rau ua (mm) | ± 0.5 hli | ± 0.8 hli | ± 1.2 | ± 4.0 | ± 6.0 | ± 8.0 |
Qhov ceev: ≥19.1g / cm³
Nondestructive testing: Rau txoj kab uas hla > 15.00 mm: 100% ultrasonic kuaj. Rau txoj kab uas hla ntawm 0.50-50.0mm: Eddy tam sim no kuaj ntawm cov pas nrig nrog hauv av.
Txoj kab uas hla (mm) | Hardness (HV 10) |
0.50-2.99 Nws | — |
3.00-9.99 Nws | 420-500 Nws |
10.0-29.9 Nws | 420-480 : kuv |
30.0-49.9 Nws | 380-460 : kuv |
≥50 | 350 |
Deg mob:
Txoj kab uas hla (mm) | Deg mob |
0.50-90.0 Nws | Tshuaj ntxuav |
≥40.0 | Hloov Ra ≤3.2μm |
0.50-30 Nws | Qhov chaw tsis muaj av Ra≤1.0μm |
≥40.0 | - Centerless hauv av Ra≤1.2μm |
Sau koj cov lus ntawm no thiab xa tuaj rau peb