High Quality Stock Hot Sale Molybdenum Sheet 0.2mm
Our firm sticks to the basic principle of “Quality is the life of your company, and status will be the soul of it” for High Quality Stock Hot Sale Molybdenum Sheet 0.2mm, Welcome to create the well and extensive standing business enterprise interactions with our business to produce a superb potential jointly. customers’ pleasure is our eternal pursuit!
Our firm sticks to the basic principle of “Quality is the life of your company, and status will be the soul of it” for Hot Sale Molybdenum Sheet 0.2mm, Molybdenum Sheet 0.2mm, Stock Molybdenum Sheet 0.2mm, Our market share of our products has greatly increased yearly. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future. We are looking forward to your inquiry and order.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets
Thickness(mm) | Thickness tolerance(±mm) | Max.width(mm) | Width tolerance(±mm) |
0.10 | 0.008 | 305 | 0.5 |
0.10-0.127 | 0.010 | 305 | 0.5 |
0.127-0.15 | 0.010 | 610 | 0.5 |
0.15-0.25 | 0.015 | 800 | 0.5 |
0.25-0.50 | 0.020 | 915 | 1.6 |
0.50-0.80 | 0.028 | 915 | 1.6 |
0.80-1.20 | 0.035 | 915 | 1.6 |
1.20-2.00 | 3% | 915 | 1.6 |
Cold rooled sheets
Thickness(mm) | Thickness tolerance(±mm) | Max.width(mm) | Width tolerance(±mm) |
1.00 | 0.080 | 850 | 2.0 |
1.00-1.50 | 0.130 | 850 | 2.0 |
1.50-2.00 | 0.150 | 850 | 2.0 |
2.00-3.60 | 0.180 | 1200 | 2.0 |
3.60-50.00 | 5% | 1500 | 2.0 |
Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness<0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: >200 HV
Tensile test:
Thickness(mm) | Tensile Srenght Min. (MPa) | 0.2 % Yield strength Min. (MPa) | ElongationMin.(%) |
0.1-0.25 | 700 | 620 | 2.0 |
0.25-0.40 | 680 | 590 | 3.0 |
0.40-0.65 | 680 | 590 | 5.0 |
0.65-1.50 | 680 | 580 | 10.0 |
1.50-2.30 | 640 | 580 | 12.0 |
2.30-5.00 | 640 | 580 | 15.0 |
5.00-10.00 | 640 | 580 | 10.0 |
10.00-13.00 | 590 | 540 | 10.0 |
13.00-25.00 | 500 | 480 | 2.0 |
25.00-50.00 | 500 | 480 | 1.0 |
Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | 99.97 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 30 | 100 |
H | 10 | 20 |
N | 10 | 70 |
O | 40 | - |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |