Pepa Tantalum
Huina kemika:
| Nā mea nui a me nā mea liʻiliʻi | Min.maʻiʻo(%) | ASTM B386 (361) |
| Ta | 99.95 | kaulike |
| haumia | Nā waiwai nui (μg/g) | Nā waiwai nui (μg/g) |
| Fe | 100 | 100 |
| Mo | 100 | 200 |
| Nb | 400 | 100 |
| Ni | 50 | 100 |
| Si | 50 | 50 |
| Ti | 50 | 100 |
| W | 100 | 500 |
| C | 30 | 200 |
| H | 15 | 15 |
| N | 50 | 100 |
| O | 100 | 250 |
| Cd | 10 | - |
| Hg | 10 | - |
| Pb | 10 | - |
ʻO nā ana a me nā tolerances
| Mānoanoa (mm) | ʻO ka ʻae ʻana i ka mānoanoa (± mm a i ʻole % o ka mānoanoa) | ʻO ka ʻae ākea ± mm | |
| Laulā≤320mm | 320mm≤Width≤610mm | ||
| 0.10 | 0.008 | 0.5 | |
| 0.10-0.15 | 0.010 | 0.5 | |
| 0.15-0.30 | 0.010 | 0.5 | |
| 0.30-0.40 | 0.015 | 0.037 | 1.6 |
| 0.40-0.60 | 0.020 | 0.050 | 1.6 |
| 0.60-0.80 | 0.030 | 0.065 | 1.6 |
| 0.80-1.00 | 0.035 | 0.080 | 1.6 |
| 1.00-2.50 | 0.040 | 0.100 | 2.0 |
| 2.50-6.00 | 0.060 | 4% | 2.0 |
| 6.00-12.70 | 5% | 2.0 | |
Length tolerance: ʻO ka lōʻihi o ka lōʻihi no ka lōʻihi o ka pepa a hiki i ka 1000mm maximal +5/-0 mm.
Paha: ma.4% (ke ana ana ma ke kumu o ASTM B708)
Māmā: ≥16.6g/cm³
Vicker paakiki: Thickness≥0.15mm : ≤125HV
Ho'āʻo tensile:
| mānoanoa(mm) | Ikaika U'iMin. (MPa) | 0.2% Ka ikaika huaMin.(MPa) | ʻO ka elongationMin.(%) |
| 0.10-0.15 | 250 | 180 | 15 |
| 0.15-1.50 | 230 | 160 | 20 |
| 1.50-12.70 | 225 | 140 | 30 |
'Ike: 'O ka mea 'ano like 'ole ka maika'i, me ka 'ole o nā mea 'ē, nā māhele a me nā ha'iha'i. Hiki i nā pepa moe ('a'ole i 'oki 'ia) hiki ke loa'a nā māwae li'ili'i.
E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou
