Tungsten Rod
Abubuwan sinadaran:
| Manyan abubuwa da ƙananan abubuwa | Min. abun ciki (%) | Saukewa: ASTM B760 |
| W | 99.95 | daidaitawa |
| Najasa | Matsakaicin ƙimar (μg/g) | Matsakaicin ƙimar (μg/g) |
| Al | 15 | - |
| Cu | 10 | - |
| Cr | 20 | - |
| Fe | 30 | 100 |
| K | 10 | - |
| Ni | 20 | 100 |
| Si | 20 | 100 |
| Mo | 100 | - |
| C | 30 | 100 |
| H | 5 | - |
| N | 5 | 100 |
| O | 20 | 100 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Diamita da haƙuri:
| Diamita (mm) | Hakuri | |||
| Mik'ewa | jabu | Juyawa | Kasa | |
| 0.50-0.99 | - | - | ± 0.007 | |
| 1.00-1.99 | - | - | ± 0.010 | |
| 2.00-2.99 | ± 2.0% | - | ± 0.015 | |
| 3.00-15.9 | - | - | ± 0.020 | |
| 16.0-24.9 | - | ± 0.30 | ± 0.030 | |
| 25.0-34.9 | - | ± 0.40 | ± 0.050 | |
| 35.0-39.9 | - | ± 0.40 | ± 0.30 | ± 0.060 |
| 40.0-49.9 | - | ± 0.40 | ± 0.30 | ± 0.20 |
| 50.0-90.0 | - | ± 1.00 | ± 0.40 | - |
Tsawo da madaidaiciya:
| Diamita (mm) | Tsawon samarwa (mm) | Tsayawa / Mita (mm) | |
| An share | Kasa/juya | ||
| 0.50-10.0 | ≥500 | 2.5 | 2.5 |
| 10.1-50.0 | ≥300 | 2.0 | 1.5 |
| 50.1-90.0 | ≥ 100 | 2.0 | 1.5 |
Haƙuri na tsayi:
| Diamita 0.50-30.0 mm | ||||||
| Tsawon ƙididdiga (mm) | ≥15 | 15-120 | 120-400 | 400-1000 | 1000-2000 | ：2000 |
| Haƙurin tsayi (mm) | ± 0.2 | ± 0.3 | ± 0.5 | ± 2.0 | ± 3.0 | ± 4.0 |
| Diamita: 30.0 mm | ||||||
| Tsawon ƙididdiga (mm) | ≥30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ：2000 |
| Haƙurin tsayi (mm) | ± 0.5 | ± 0.8 | ± 1.2 | ± 4.0 | ± 6.0 | ± 8.0 |
Maɗaukaki: ≥19.1g/cm³
Gwajin mara lalacewa: Don diamita ：15.00 mm: 100% gwajin ultrasonic. Don diamita na 0.50-50.0mm: Eddy curent gwaje-gwaje akan sanduna tare da saman ƙasa.
| Diamita (mm) | Hardness (HV 10) |
| 0.50-2.99 | - |
| 3.00-9.99 | 420-500 |
| 10.0-29.9 | 420-480 |
| 30.0-49.9 | 380-460 |
| ≥50 | ：350 |
Yanayin saman:
| Diamita (mm) | Yanayin saman |
| 0.50-90.0 | Chemical tsabtace |
| ≥40.0 | Juya Ra ≤3.2μm |
| 0.50-30 | Ƙasa marar tsakiya Ra≤1.0μm |
| ≥40.0 | - Ƙasa marar tsakiya Ra≤1.2μm |
Ku rubuta sakonku anan ku aiko mana
