Good User Reputation for Polyester Grosgrain Ribbon
We are convinced that with joint endeavours, the small business between us will bring us mutual benefits. We could assure you products quality and competitive selling price for Good User Reputation for Polyester Grosgrain Ribbon, Our products love very good popularity between our clients. We welcome customers, company associations and close friends from all components with the entire world to call us and seek out cooperation for mutual positive aspects.
We are convinced that with joint endeavours, the small business between us will bring us mutual benefits. We could assure you products quality and competitive selling price for Grosgrain Ribbon, Grossgrain Ribbon, Polyester Grosgrain Ribbon, Looking forward, we’ll keep pace with the times, continuing to create new products and solutions. With our strong research team, advanced production facilities, scientific management and top services, we are going to supply high quality solutions to our customers worldwide. We sincerely invite you to be our business partners for mutual benefits.
Molybdenum ribbon
Chemical composition:
Main and minor components | Min.content(%) |
Mo | Balance |
Y-Mixoxide | 0.47-0.60% |
Impurities | Max.values (μg/g) |
Al | 10 |
Cu | 20 |
Cr | 20 |
Fe | 20 |
K | 20 |
Ni | 10 |
Si | 20 |
W | 300 |
C | 30 |
H | 10 |
N | 10 |
Cd | 5 |
Hg | 1 |
Pb | 5 |
Dimensions and tolerances:
Ribbon Length/Spool: ≥ 50 m / Spool
Ribbon Thickness: ≥ 50 g / Spool
Ribbon Thickness: 0.015-0.029 mm: +0.002/-0.003mm; 0.030-0.042 mm: +0.003/-0.004mm.
Ribbon Width:
1.5-2.99 mm: ±0.10 mm
3.00-4.99mm: ±0.20 mm
5.0-9.99mm: ±0.30 mm
10.00-20.00mm: ±0.50 mm
Edge Angle α5: <13o
Density: ≥10.1g/cm³
Tensile Strength: 750-1000MPa
Surface condition: The surface is dull and free of oxide layers and impurities that are visible to the naked eye. The final annealing is done in continuous furnaces under ruducing hydrogen atmosphere.
Appearance: The edges are free of defects such as kinks, splits ,ripples, twists or burrs.
Roughness: Ra≥0.15μm
Sagitta: Curvature of ribbon≤2mm/200mm.
Edge line: The fringing to the edge line may not exceed 40 μm to the middline.