Good Quality Tungsten Cemented Carbide Plates Sheets For Stone And Polycrystalline Silicon Crusher With Four Precise Screw Holes
Sticking to the principle of “Super Good quality, Satisfactory service” ,We are striving to become an excellent organization partner of you for Good Quality Tungsten Cemented Carbide Plates Sheets For Stone And Polycrystalline Silicon Crusher With Four Precise Screw Holes, We are going to hold doing work hard and as we try out our greatest to source the most beneficial quality products and solutions, most competitive selling price and outstanding service to each individual customer. Your satisfaction, our glory!!!
Sticking to the principle of “Super Good quality, Satisfactory service” ,We are striving to become an excellent organization partner of you for Cemented Carbide Plates Tungsten Carbide Plates, Plates For Stone Crusher Plates For Polycrystalline Silicon Crusher, Tungsten Plates Tungsten Sheets, We’ve got a good reputation for stable quality merchandise, well received by customers at home and abroad. Our company would be guided by the idea of “Standing in Domestic Markets, Walking into International Markets”. We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B760 |
| W | 99.97 | balance |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 15 | - |
| Cu | 10 | - |
| Cr | 20 | - |
| Fe | 30 | 100 |
| K | 10 | - |
| Ni | 20 | 100 |
| Si | 20 | 100 |
| Mo | 300 | - |
| C | 30 | 100 |
| H | 5 | - |
| N | 5 | 100 |
| O | 20 | 100 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
Cold rolled sheets
| Thickness(mm) | Thickness tolerance(±mm) | ||
| Width≤200mm | Max.width 510mm | Width tolerance(±mm) | |
| 0.025 | 0.003 | ||
| 0.025-0.03 | 0.004 | 0.5 | |
| 0.03-0.04 | 0.005 | 0.5 | |
| 0.04-0.05 | 0.006 | 0.5 | |
| 0.05-0.06 | 0.008 | 0.5 | |
| 0.06-0.08 | 0.010 | 0.5 | |
| 0.08-0.10 | 0.015 | 0.5 | |
| 0.10-0.15 | 0.025 | 0.045 | 0.5 |
| 0.15-0.30 | 0.035 | 0.060 | 1.0 |
| 0.30-0.40 | 0.05 | 0.085 | 1.6 |
| 0.40-0.50 | 0.06 | 0.110 | 1.6 |
Hot rooled sheets
| Thickness(mm) | Thickness tolerance(±mm) | ||
| Width≤510mm | Max.width 1200(mm) | Width tolerance(±mm) | |
| 0.05-0.60 | 0.110 | 1.6 | |
| 0.60-0.80 | 0.140 | 2.0 | |
| 0.08-1.00 | 0.200 | 2.0 | |
| 1.00-2.00 | 0.250 | 2.0 | |
| 2.00-8.00 | 0.300 | 2.0 | |
| 8.0-20.00 | 5% | 5% | 2.0 |
Length tolerance: the length tolerance for all dimensions is maximal +5/-0 mm.
Flatness: max. 4% (measuring procedure on the basis of ASTM B760)
Density: thickness＜10.00mm density＞19.2g/cm³
thicknes（10.00-20.00mm）density＞19.1g/cm³
Vickers hardness:
≤0.10 mm ≥550 HV
0.10-0.05 mm ≥500 HV
0.50-1.50mm ≥470 HV
1.50-10.00mm ≥450 HV
10.00-20.00mm ≥420 HV
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures.
Bed sheet (not trimmed) may have small edge cracks.
Surface quality:
Cold rolled ≤ 0.30mm bright
Cold rolled 0.3-0.5 mm pickled
Hot rolled ≥0.50 mm pickled
