China Free sample for Molybdenum Mo Moly Electrodes Bars Rods Manufacturer and Supplier

Free sample for Molybdenum Mo Moly Electrodes Bars Rods

Short Description:

Product Detail

Product Tags

Our enterprise since its inception, often regards solution excellent as enterprise life, continually strengthen output technology, enhance product high quality and continually strengthen organization total high-quality administration, in strict accordance using the national standard ISO 9001:2000 for Free sample for Molybdenum Mo Moly Electrodes Bars Rods, We promise to try our best to offer you with top quality and effective products and services.
Our enterprise since its inception, often regards solution excellent as enterprise life, continually strengthen output technology, enhance product high quality and continually strengthen organization total high-quality administration, in strict accordance using the national standard ISO 9001:2000 for Mo Rods For Glass Industry, Moly Bars For Temperature Vacuum Furnace, Moly Electrode For Glass Melting Furnace, If any product meed your demand, remember to feel free to contact us. We’re sure your any inquiry or requirement will get prompt attention, high-quality solutions, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
Molybdenum rods Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	99.95	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	100
W	300	-
C	30	100
H	10	20
N	10	70
O	40	-
Cd	5	-
Hg	1	-
Pb	5	-

Dimensions and tolerances:

Diameter (mm)	Diameter tolerance (mm)
Ground
0.50-0.99	±0.007
1.00-1.99	±0.010
1.00-2.99	±0.015
3.00-15.9	±0.020
16.0-24.9	±0.030
25.0-34.9	±0.050
35.0-3939	±0.060
≥40.0	±0.20
Cleaned
0.50-4.0	±2.0%
4.10-10.0	±1.5%
15.0-50.0	±0.30
51.0-75.0	±0.40
75.1-120.0	±1.00
121.0-165.0	±1.50
Turned
40.0-49.9	±0.30
50.0-165.0	±0.40

Length and straightness:

Diameter (mm)	Production length (mm)	Stiraightness/Meter (mm)
Diameter (mm)	Production length (mm)	Cleaned	Ground/turned
0.50-0.99	＞500	＜2.5	＜2.5
1.00-9.90	＞300	＜2.0	＜1.5
10.0-165.0	＞100	＜1.5	＜1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.2	±0.3	±0.5	±0.8	±1.2	±2.0
Diameter ＞30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±1.0	±1.5	±2.5	±4.0	±6.0	±8.0

Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm)	Tensile strength(MPa)	0.2% Yield Strength(MPa)	Elongation(%)	Hardness(HV 10)
0.50-3.18	≥585	≥450	≥15
3.18-10.30	≥515	≥380	≥15
10.32-22.20	≥620	≥515	≥18	230-280
22.20-28.60	≥585	≥480	≥15	225-270
28.60-47.60	≥515	≥450	≥10	215-260
47.60-73.00	≥480	≥415	≥10	210-250
73.00-88.90	≥450	≥380	≥10	205-240
89.00-120.9	≥450	≥380	≥5	200-240
121.0-164.9	≥450	≥380	≥5	180-240
165.0	≥450	≥380	≥-	180-240

Surface condition:

Surface：	Cleaned	Ground	Turned
	φ0.50-165mm	φ0.50-50.00mm	φ≥40.00mm
Roughness	Diameter (mm)	Ra (μm) Ground	Ra (μm) Turned
	≤2.50	≤0.80	-
	2.5-50.0	≤1.00	-
	≥40.0	-	≤3.2