China Factory wholesale Tzm Molybdenum Rod For Temperature Alloy Steel Manufacturer and Supplier

Factory wholesale Tzm Molybdenum Rod For Temperature Alloy Steel

Short Description:

Product Detail

Product Tags

We always perform for a tangible staff to ensure that we can present you with the most effective top quality plus the greatest cost for Factory wholesale Tzm Molybdenum Rod For Temperature Alloy Steel, Now we have extensive goods source as well as price tag is our advantage. Welcome to inquire about our products and solutions.
We always perform for a tangible staff to ensure that we can present you with the most effective top quality plus the greatest cost for Molybdenum Alloy, Molybdenum Alloy Steel, Tzm Rod, What You Have to have Is What We Pursue.We’ve been sure our solutions will bring you first class quality.And now sincerely hope to promote partner friendship with you from all over the world. Let’s joint hands to cooperate with mutual benefits!
TZM rods
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	blance	balance
Ti	0.40-0.55%	0.40-0.55%
Zr	0.06-0.12%	0.06-0.12%
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	50
W	300	-
C	100-400	100-400
H	10	-
N	10	20
O	500	300
Cd	5	-
Hg	1	-
Pb	5	-

Dimensions and tolerances:

Diameter (mm)	Diameter tolerance (mm)
Ground
0.50-0.99	±0.007
1.00-1.99	±0.010
1.00-2.99	±0.015
3.00-15.9	±0.020
16.0-24.9	±0.030
25.0-34.9	±0.050
35.0-3939	±0.060
≥40.0	±0.20
Cleaned
0.50-4.0	±2.0%
4.10-10.0	±1.5%
15.0-50.0	±0.30
51.0-75.0	±0.40
75.1-120.0	±1.00
121.0-165.0	±1.50
Turned
40.0-49.9	±0.30
50.0-165.0	±0.40

Length and straightness:

Diameter (mm)	Production length (mm)	Stiraightness/Meter (mm)
Diameter (mm)	Production length (mm)	Cleaned	Ground/turned
0.50-0.99	＞500	＜2.5	＜2.5
1.00-9.90	＞300	＜2.0	＜1.5
10.0-165.0	＞100	＜1.5	＜1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.2	±0.3	±0.5	±0.8	±1.2	±2.0
Diameter ＞30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±1.0	±1.5	±2.5	±4.0	±6.0	±8.0

Density:
1. 0.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground.

Diameter(mm)	Tensile strength(MPa)	0.2% Yield Strength(MPa)	Elongation(%)	Hardness(HV 10)
0.50-4.76	-	-	-	-
4.76-22.20	≥790	≥690	≥18
22.20-28.60	≥760	≥655	≥15	260-320
28.60-47.60	≥690	≥585	≥10	250-310
47.60-73.00	≥620	≥550	≥10	245-300
73.00-120.9	≥585	≥515	≥5	240-290
121.0-165	≥585	≥515	≥5	220-280

Surface condition:

Surface：	Cleaned	Ground	Turned
	φ0.50-165mm	φ0.50-50.00mm	φ≥40.00mm
Roughness	Diameter (mm)	Ra (μm) Ground	Ra (μm) Turned
	≤2.50	≤0.80	-
	2.5-50.0	≤1.00	-
	≥40.0	-	≤3.2