Factory Supply Wolfram Tungsten Rod / Tungsten Carbide Rods
Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for Factory Supply Wolfram Tungsten Rod / Tungsten Carbide Rods, Only for accomplish the good-quality products to fulfill customer’s demand, all of our merchandise have been strictly inspected before shipment.
Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for Tungsten Bars, Tungsten Carbide Rods, Wolfram Tungsten Rod, Further, we have been supported by highly experienced and knowledgeable professionals, who have immense expertise in their respective domain. These professionals work in close coordination with each other to supply our clients an effective range of products.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B760 |
W | 99.95 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 15 | - |
Cu | 10 | - |
Cr | 20 | - |
Fe | 30 | 100 |
K | 10 | - |
Ni | 20 | 100 |
Si | 20 | 100 |
Mo | 100 | - |
C | 30 | 100 |
H | 5 | - |
N | 5 | 100 |
O | 20 | 100 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Diameter and tolerances:
Diameter (mm) | Tolerance | |||
Straightened | Forged | Turned | Ground | |
0.50-0.99 | - | - | ±0.007 | |
1.00-1.99 | - | - | ±0.010 | |
2.00-2.99 | ±2.0 % | - | ±0.015 | |
3.00-15.9 | - | - | ±0.020 | |
16.0-24.9 | - | ±0.30 | ±0.030 | |
25.0-34.9 | - | ±0.40 | ±0.050 | |
35.0-39.9 | - | ±0.40 | ±0.30 | ±0.060 |
40.0-49.9 | - | ±0.40 | ±0.30 | ±0.20 |
50.0-90.0 | - | ±1.00 | ±0.40 | - |
Length and straightness:
Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
Cleaned | Ground/turned | ||
0.50-10.0 | ≥500 | <2.5 | <2.5 |
10.1-50.0 | ≥300 | <2.0 | <1.5 |
50.1-90.0 | ≥100 | <2.0 | <1.5 |
Length tolerance:
Diameter 0.50-30.0 mm | ||||||
Nominal length (mm) | ≥15 | 15-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±2.0 | ±3.0 | ±4.0 |
Diameter >30.0 mm | ||||||
Nominal length (mm) | ≥30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.5 | ±0.8 | ±1.2 | ±4.0 | ±6.0 | ±8.0 |
Density: ≥19.1g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
Diameter(mm) | Hardness (HV 10) |
0.50-2.99 | — |
3.00-9.99 | 420-500 |
10.0-29.9 | 420-480 |
30.0-49.9 | 380-460 |
≥50 | >350 |
Surface condition:
Diameter (mm) | Surface condition |
0.50-90.0 | Chemical cleaned |
≥40.0 | Turned Ra ≤3.2μm |
0.50-30 | Centerless ground Ra≤1.0μm |
≥40.0 | - Centerless ground Ra≤1.2μm |