Factory For Hot Sale Polished Molybdenum Alloy Metal Bar Tzm Rod And Tzm Parts

Short Description:


Product Detail

Product Tags

Our primary objective will be to offer you our shoppers a serious and responsible enterprise relationship, supplying personalized attention to all of them for Factory For Hot Sale Polished Molybdenum Alloy Metal Bar Tzm Rod And Tzm Parts, We persistently develop our enterprise spirit “quality lives the enterprise, credit assures cooperation and keep the motto in our minds: customers first.
Our primary objective will be to offer you our shoppers a serious and responsible enterprise relationship, supplying personalized attention to all of them for Molybdenum Metal Bar, Tzm Parts, Tzm Rod, we have all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
TZM rods
Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo blance balance
Ti 0.40-0.55% 0.40-0.55%
Zr 0.06-0.12% 0.06-0.12%
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 50
W 300 -
C 100-400 100-400
H 10 -
N 10 20
O 500 300
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Diameter (mm) Diameter tolerance (mm)
Ground
0.50-0.99 ±0.007
1.00-1.99 ±0.010
1.00-2.99 ±0.015
3.00-15.9 ±0.020
16.0-24.9 ±0.030
25.0-34.9 ±0.050
35.0-3939 ±0.060
≥40.0 ±0.20
Cleaned
0.50-4.0 ±2.0%
4.10-10.0 ±1.5%
15.0-50.0 ±0.30
51.0-75.0 ±0.40
75.1-120.0 ±1.00
121.0-165.0 ±1.50
Turned
40.0-49.9 ±0.30
50.0-165.0 ±0.40

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-0.99 >500 <2.5 <2.5
1.00-9.90 >300 <2.0 <1.5
10.0-165.0 >100 <1.5 <1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2.0
Diameter >30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±1.0 ±1.5 ±2.5 ±4.0 ±6.0 ±8.0

Density:
1. 0.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground.

Diameter(mm) Tensile strength(MPa) 0.2% Yield Strength(MPa) Elongation(%) Hardness(HV 10)
0.50-4.76 - - - -
4.76-22.20 ≥790 ≥690 ≥18  
22.20-28.60 ≥760 ≥655 ≥15 260-320
28.60-47.60 ≥690 ≥585 ≥10 250-310
47.60-73.00 ≥620 ≥550 ≥10 245-300
73.00-120.9 ≥585 ≥515 ≥5 240-290
121.0-165 ≥585 ≥515 ≥5 220-280

Surface condition:

Surface: Cleaned Ground Turned
  φ0.50-165mm φ0.50-50.00mm φ≥40.00mm
Roughness Diameter (mm) Ra (μm) Ground Ra (μm) Turned
  ≤2.50 ≤0.80 -
2.5-50.0 ≤1.00 -
≥40.0 - ≤3.2

  • Previous:
  • Next:

  • Write your message here and send it to us