Factory Directly supply Pure Tantalum 99.9 Tantalum Wire 0.2mm For Capacitor Tantalum
Being supported by an advanced and expert IT crew, we could give technical support on pre-sales & after-sales assistance for Factory Directly supply Pure Tantalum 99.9 Tantalum Wire 0.2mm For Capacitor Tantalum, Welcome all customers of property and abroad to go to our organization, to forge a fantastic long run by our cooperation.
Being supported by an advanced and expert IT crew, we could give technical support on pre-sales & after-sales assistance for Capacitor Tantalum, Pure Tantalum 99.9, Tantalum Wire 0.2mm, We care about every steps of our services, from factory selection, product development & design, price negotiation, inspection, shipping to aftermarket. We have now implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our goods have been strictly inspected before shipment. Your Success, Our Glory: Our aim is to help customers realize their goals. We’re making great efforts to achieve this win-win situation and sincerely welcome you to join us.
Chemical composition:
| Brand name | Ta1 | Ta2(doped) | ||
| ChemicalCompositions （%） |
Ta≥ | 99.95 | 99.95 | |
| Impurities | O | 0.0200 | 0.0200 | |
| C | 0.0050 | 0.0050 | ||
| N | 0.0040 | 0.0040 | ||
| H | 0.0015 | 0.0015 | ||
| Fe | 0.0045 | 0.0045 | ||
| Ni | 0.0025 | 0.0025 | ||
| Cr | 0.0025 | 0.0025 | ||
| Nb | 0.0050 | 0.0050 | ||
| Mo | 0.0020 | 0.0020 | ||
| W | 0.0020 | 0.0020 | ||
| Ti | 0.0005 | 0.0005 | ||
| Sn | 0.0010 | 0.0010 | ||
| Ca | 0.0010 | 0.0010 | ||
| Na | 0.0020 | 0.0020 | ||
| Al | 0.0005 | 0.0005 | ||
| Si | 0.0030 | 0.0030 | ||
Surface: Smooth surface, clean, no oil, cracks and burrs, no tangling, knotting, crossover, etc.
Size and tolerance:
| Diameter (mm) | Tolerance (mm) |
| 0.06 0.10 .011 .015 | ±0.005 |
| 0.17 0.19 0.20 0.24 0.25 0.29 0.30 | ±0.006 |
| 0.33 0.34 0.35 0.381 0.4 0.47 0.50 | ±0.007 |
| 0.60 0.80 | ±0.01 |
Mechanical properties:
| Type | Tensile strength Rm/(N/mm2) | ElongationA200mm/% |
| Soft（M） | 300～750 | 10～30 |
| Semi-hard（Y2） | 750～1250 | 1～6 |
| Hard（Y） | >1250 | 1～5 |
Antioxidant brittleness:
| Brand name | D/mm | Anti-oxidative brittle bending times, not less than |
| Ta1 | 0.10～0.40 | 3 |
| >0.40 | 4 | |
| Ta2(doped) | 0.10～0.40 | 4 |
| >0.40 | 6 |
Straightness: Arc degree is greater than or equal to 800mm diameter. Lift height is less than 20mm.
