China Factory Cheap Pure Molybdenum Rod Moly Rod/bar Tzm 99.95% Manufacturer and Supplier

Factory Cheap Pure Molybdenum Rod Moly Rod/bar Tzm 99.95%

Short Description:

Product Detail

Product Tags

We retain bettering and perfecting our goods and service. At the same time, we perform actively to do research and enhancement for Factory Cheap Pure Molybdenum Rod Moly Rod/bar Tzm 99.95%, When you are interested in any of our merchandise or would want to go over a custom made get, remember to feel totally free to contact us.
We retain bettering and perfecting our goods and service. At the same time, we perform actively to do research and enhancement for Moly Bar, Molybdenum Rod/bar, Tzm Moly Rod, With the highest standards of product quality and service, our solutions have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We’ve been very pleased to serve customers from all over the world!
Molybdenum rods Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	99.95	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	100
W	300	-
C	30	100
H	10	20
N	10	70
O	40	-
Cd	5	-
Hg	1	-
Pb	5	-

Dimensions and tolerances:

Diameter (mm)	Diameter tolerance (mm)
Ground
0.50-0.99	±0.007
1.00-1.99	±0.010
1.00-2.99	±0.015
3.00-15.9	±0.020
16.0-24.9	±0.030
25.0-34.9	±0.050
35.0-3939	±0.060
≥40.0	±0.20
Cleaned
0.50-4.0	±2.0%
4.10-10.0	±1.5%
15.0-50.0	±0.30
51.0-75.0	±0.40
75.1-120.0	±1.00
121.0-165.0	±1.50
Turned
40.0-49.9	±0.30
50.0-165.0	±0.40

Length and straightness:

Diameter (mm)	Production length (mm)	Stiraightness/Meter (mm)
Diameter (mm)	Production length (mm)	Cleaned	Ground/turned
0.50-0.99	＞500	＜2.5	＜2.5
1.00-9.90	＞300	＜2.0	＜1.5
10.0-165.0	＞100	＜1.5	＜1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.2	±0.3	±0.5	±0.8	±1.2	±2.0
Diameter ＞30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±1.0	±1.5	±2.5	±4.0	±6.0	±8.0

Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm)	Tensile strength(MPa)	0.2% Yield Strength(MPa)	Elongation(%)	Hardness(HV 10)
0.50-3.18	≥585	≥450	≥15
3.18-10.30	≥515	≥380	≥15
10.32-22.20	≥620	≥515	≥18	230-280
22.20-28.60	≥585	≥480	≥15	225-270
28.60-47.60	≥515	≥450	≥10	215-260
47.60-73.00	≥480	≥415	≥10	210-250
73.00-88.90	≥450	≥380	≥10	205-240
89.00-120.9	≥450	≥380	≥5	200-240
121.0-164.9	≥450	≥380	≥5	180-240
165.0	≥450	≥380	≥-	180-240

Surface condition:

Surface：	Cleaned	Ground	Turned
	φ0.50-165mm	φ0.50-50.00mm	φ≥40.00mm
Roughness	Diameter (mm)	Ra (μm) Ground	Ra (μm) Turned
	≤2.50	≤0.80	-
	2.5-50.0	≤1.00	-
	≥40.0	-	≤3.2