China Factory Cheap Hot Micro Grain Tungsten Carbide Tips Drill Rod Manufacturer and Supplier

Factory Cheap Hot Micro Grain Tungsten Carbide Tips Drill Rod

Short Description:

Product Detail

Product Tags

We’ve got the most highly developed manufacturing machines, experienced and qualified engineers and workers, acknowledged good quality management systems and also a friendly specialist gross sales team pre/after-sales support for Factory Cheap Hot Micro Grain Tungsten Carbide Tips Drill Rod, The principle of our corporation is always to give high-quality merchandise, expert service, and honest communication. Welcome all friends to place trial get for making a long-term enterprise partnership.
We’ve got the most highly developed manufacturing machines, experienced and qualified engineers and workers, acknowledged good quality management systems and also a friendly specialist gross sales team pre/after-sales support for Carbide Tips Drill Rods, Solid Carbide Rod, Tungsten Carbide Rod, With the technology as the core, develop and produce high-quality merchandise according to the diverse needs of the market. With this concept,the company will continue to develop goods with high added values and continuously improve products and solutions,and will give many customers with the best products and solutions and services!
Chemical composition:

Main and minor components	Min.content(%)	ASTM B760
W	99.95	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	15	-
Cu	10	-
Cr	20	-
Fe	30	100
K	10	-
Ni	20	100
Si	20	100
Mo	100	-
C	30	100
H	5	-
N	5	100
O	20	100
Cd	5	-
Hg	1	-
Pb	5	-

Diameter and tolerances:

Diameter (mm)	Tolerance
	Straightened	Forged	Turned	Ground
0.50-0.99	-	-		±0.007
1.00-1.99	-	-		±0.010
2.00-2.99	±2.0 %	-		±0.015
3.00-15.9	-	-		±0.020
16.0-24.9	-	±0.30		±0.030
25.0-34.9	-	±0.40		±0.050
35.0-39.9	-	±0.40	±0.30	±0.060
40.0-49.9	-	±0.40	±0.30	±0.20
50.0-90.0	-	±1.00	±0.40	-

Length and straightness:

Diameter (mm)	Production length (mm)	Stiraightness/Meter (mm)
Diameter (mm)	Production length (mm)	Cleaned	Ground/turned
0.50-10.0	≥500	＜2.5	＜2.5
10.1-50.0	≥300	＜2.0	＜1.5
50.1-90.0	≥100	＜2.0	＜1.5

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm)	≥15	15-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.2	±0.3	±0.5	±2.0	±3.0	±4.0
Diameter ＞30.0 mm
Nominal length (mm)	≥30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.5	±0.8	±1.2	±4.0	±6.0	±8.0

Density: ≥19.1g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm)	Hardness (HV 10)
0.50-2.99	—
3.00-9.99	420-500
10.0-29.9	420-480
30.0-49.9	380-460
≥50	＞350

Surface condition:

Diameter (mm)	Surface condition
0.50-90.0	Chemical cleaned
≥40.0	Turned Ra ≤3.2μm
0.50-30	Centerless ground Ra≤1.0μm
≥40.0	- Centerless ground Ra≤1.2μm