China New Product Pure Tantalum And Alloy Tantalum Wire
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate within our success for China New Product Pure Tantalum And Alloy Tantalum Wire, We could do your personalized buy to satisfy your own satisfactory! Our firm sets up several departments, including generation department, product sales department, quality control department and sevice center, etc.
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate within our success for Best Custom-made Tantalum Wire, Precision Tantalum Wire For Electrode, Pure Tantalum And Alloy Tantalum Wire, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.
Chemical composition:
Brand name | Ta1 | Ta2(doped) | ||
ChemicalCompositions (%) |
Ta≥ | 99.95 | 99.95 | |
Impurities | O | 0.0200 | 0.0200 | |
C | 0.0050 | 0.0050 | ||
N | 0.0040 | 0.0040 | ||
H | 0.0015 | 0.0015 | ||
Fe | 0.0045 | 0.0045 | ||
Ni | 0.0025 | 0.0025 | ||
Cr | 0.0025 | 0.0025 | ||
Nb | 0.0050 | 0.0050 | ||
Mo | 0.0020 | 0.0020 | ||
W | 0.0020 | 0.0020 | ||
Ti | 0.0005 | 0.0005 | ||
Sn | 0.0010 | 0.0010 | ||
Ca | 0.0010 | 0.0010 | ||
Na | 0.0020 | 0.0020 | ||
Al | 0.0005 | 0.0005 | ||
Si | 0.0030 | 0.0030 |
Surface: Smooth surface, clean, no oil, cracks and burrs, no tangling, knotting, crossover, etc.
Size and tolerance:
Diameter (mm) | Tolerance (mm) |
0.06 0.10 .011 .015 | ±0.005 |
0.17 0.19 0.20 0.24 0.25 0.29 0.30 | ±0.006 |
0.33 0.34 0.35 0.381 0.4 0.47 0.50 | ±0.007 |
0.60 0.80 | ±0.01 |
Mechanical properties:
Type | Tensile strength Rm/(N/mm2) | ElongationA200mm/% |
Soft(M) | 300~750 | 10~30 |
Semi-hard(Y2) | 750~1250 | 1~6 |
Hard(Y) | >1250 | 1~5 |
Antioxidant brittleness:
Brand name | D/mm | Anti-oxidative brittle bending times, not less than |
Ta1 | 0.10~0.40 | 3 |
>0.40 | 4 | |
Ta2(doped) | 0.10~0.40 | 4 |
>0.40 | 6 |
Straightness: Arc degree is greater than or equal to 800mm diameter. Lift height is less than 20mm.