Cheapest Factory Pure Molybdenum Plate/sheet
It is actually a good way to boost our products and solutions and repair. Our mission should be to produce imaginative products and solutions to clients using a fantastic working experience for Cheapest Factory Pure Molybdenum Plate/sheet, We can give you the most competitive prices and high quality, because we are much more PROFESSIONAL! So please do not hesitate to contact us.
It is actually a good way to boost our products and solutions and repair. Our mission should be to produce imaginative products and solutions to clients using a fantastic working experience for Molybdenum Plate, Pure Molybdenum Plates, Pure Molybdenum Sheets, We have top engineers in these industries and an efficient team in the research. What is more, now we have our own archives mouths and markets in China at low cost. Therefore, we can meet different inquiries from different clients. Remember to find our website to check more information from our items.
Mo-La alloy sheet
Chemical composition:
| Main and minor components | Min.content(%) |
| Mo | Balance |
| La | 0.52-0.62 |
| La2O3 | 0.61-0.73 |
| Impurities | Max.values(μg/g) |
| Al | 10 |
| Cr | 20 |
| Cu | 20 |
| Fe | 20 |
| K | 20 |
| Ni | 10 |
| Si | 20 |
| W | 300 |
| C | 30 |
| H | 10 |
| N | 10 |
| Cd | 5 |
| Hg | 1 |
| Pb | 5 |
Dimensions and tolerances
| Sheet thickness(mm) | Thickness tolerance ± mm or % of the thickness | Max.width(mm) | Width tolerance(±) |
| 1.00 | +0.08 | 850 | 2.0 |
| 1.0-1.5 | 0.13 | 850 | 2.0 |
| 1.5-2.0 | 0.15 | 850 | 2.0 |
| 2.0-3.6 | 0.18 | 1000 | 2.0 |
| 3.6-50.0 | 5% | 1000 | 2.0 |
The length tolerance for sheet length up to 2500mm is max. +5/-0 mm.
Flatness: max 4 % (measuring procedure on the basis of ASTM B386)
Density: ≥10.1g/cm³
Hardness Vickers: ≤250 HV
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. Bed sheets (not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerance.
Surface quality: Pickled
