Best quality Purity Tungsten Dart Billet Wolfram Alloy Rod Block
We thinks what buyers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better high-quality, reduced processing costs, charges are more reasonable, won the new and outdated consumers the support and affirmation for Best quality Purity Tungsten Dart Billet Wolfram Alloy Rod Block, We sincerely welcome overseas buyers to refer to for your long-term cooperation and also the mutual development.We strongly think that we can do better and far better.
We thinks what buyers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better high-quality, reduced processing costs, charges are more reasonable, won the new and outdated consumers the support and affirmation for 99.95% Polished Tungsten Rod Bar, Pure Tungsten Rod Suqare Bar, Tungsten Round Billets, In order to meet our market demands, we’ve paied more attention to the quality of our solutions and services. Now we can meet customers’ special requirements for special designs. We persistently develop our enterprise spirit “quality lives the enterprise, credit assures cooperation and keep the motto in our minds: customers first.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B760 |
W | balance | balance |
La | 0.77-0.94% | |
La2O3 | 0.90-1.10% | |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 15 | - |
Cu | 10 | - |
Cr | 20 | - |
Fe | 30 | 100 |
K | 10 | - |
Ni | 20 | 100 |
Si | 20 | 100 |
Mo | 100 | - |
C | 30 | 100 |
H | 5 | - |
N | 5 | 100 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Diameter and tolerances:
Diameter (mm) | Tolerance | ||
Forged | Turned | Ground | |
1.20-1.99 | - | ±0.010 | |
2.00-2.99 | - | ±0.015 | |
3.00-15.9 | - | ±0.020 | |
16.0-24.9 | ±0.30 | ±0.030 | |
25.0-34.9 | ±0.40 | ±0.050 | |
35.0-39.9 | ±0.40 | ±0.30 | ±0.060 |
40.0-50.0 | ±0.40 | ±0.30 | ±0.20 |
50.0-80.0 | ±1.00 | ±0.40 | - |
Length and straightness:
Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
Cleaned | Ground/turned | ||
1.20-10.0 | ≥500 | <2.5 | <2.5 |
10.1-50.0 | ≥300 | <2.0 | <1.5 |
50.1-80.0 | ≥100 | <2.0 | <1.5 |
Length tolerance:
Diameter 1.20-30.0 mm |
||||||
Nominal length (mm) | ≥15 | 15-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±2.0 | ±3.0 | ±4.0 |
Diameter >30.0 mm |
||||||
Nominal length (mm) | ≥30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.5 | ±0.8 | ±1.2 | ±4.0 | ±6.0 | ±8.0 |
Density:
Diameter (mm) | Density (g/cm³) |
1.20-6.0 | 18.85 |
6.0-40.0 | 18.75 |
40.0-80.0 | 18.65 |
Nondestructive testing: For diameters>15.00 mm: 100% ultrasonic testing. For diameters of 1.2-50.0mm: Eddy curent tests fro ground products visual inspection.
Diameter(mm) | Hardness(HV 30) |
3.0-10.0 | >420 |
10.0-30.0 | >400 |
30.0-50.0 | >380 |
≥50 | >350 |
Surface condition:
Diameter (mm) | Surface condition |
≤2.50 | ground Ra≤0.8μm |
2.50-30.0 | ground Ra≤1.0μm |
30.0-50.0 | ground Ra≤1.2μm |
≥50.0 | Turned Ra≤3.2μm |