Best Price for Tzm Molybdenum Sheet,Tzm Plate For Injection Molding Of Metal Powder
High quality Very first,and Consumer Supreme is our guideline to offer the most beneficial service to our consumers.At present, we’re attempting our greatest to be among the top exporters in our area to fulfill buyers far more need to have for Best Price for Tzm Molybdenum Sheet,Tzm Plate For Injection Molding Of Metal Powder, At our firm with high-quality initial as our motto, we manufacture goods that are entirely made in Japan, from materials procurement to processing. This enables them for being used with self-assured peace of mind.
High quality Very first,and Consumer Supreme is our guideline to offer the most beneficial service to our consumers.At present, we’re attempting our greatest to be among the top exporters in our area to fulfill buyers far more need to have for Molybdenum Sheet, Tzm Molybdenum Sheet, Tzm Plate, Our factory covers an area of 12,000 square meters, and has a staff of 200 people, among which there are 5 technical executives. We’ve been specialized in producing.Now we have rich experience in export. Welcome to contact us and your enquiry are going to be replied as soon as possible.
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | Balance | balance |
Ti | 0.40-0.55% | 0.40-0.55% |
Zr | 0.06-0.12% | 0.06-0.12% |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 100-400 | 100-400- |
H | 10 | - |
N | 10 | 20 |
O | 500 | 300 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Cold rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.30-0.50 | 0.028 | 300 | 1.0 |
Hot rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.50-0.60 | 0.06 | 850 | 1.6 |
0.60-1.00 | 0.08 | 850 | 1.6 |
1.00-1.50 | 0.13 | 850 | 2.0 |
1.50-2.00 | 0.15 | 850 | 2.0 |
2.00-3.60 | 0.18 | 850 | 2.0 |
3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
0.30-1.00 | 700 | 600 | 5 |
1.00-2.50 | 700 | 600 | 10 |
2.50-5.00 | 700 | 600 | 12 |
5.00-20.00 | 650 | 600 | 10 |
20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.