2019 High quality Best15m Molybdenum Rod / Molybdenum Powder
High-quality comes 1st; assistance is foremost; business enterprise is cooperation” is our business enterprise philosophy which is constantly observed and pursued by our business for 2019 High quality Best15m Molybdenum Rod / Molybdenum Powder, Our company is working through the procedure principle of “integrity-based, cooperation created, people oriented, win-win cooperation”. We hope we can have a pleasant relationship with businessman from all around the earth.
High-quality comes 1st; assistance is foremost; business enterprise is cooperation” is our business enterprise philosophy which is constantly observed and pursued by our business for Molybdenum Rod, Our solutions are exported worldwide. Our customers are always satisfied with our reliable quality, customer-oriented services and competitive prices. Our mission is “to continue to earn your loyalty by dedicating our efforts to the constant improvement of our products and solutions and services in order to ensure the satisfaction of our end-users, customers, employees, suppliers and the worldwide communities in which we cooperate”.
Molybdenum rods Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | 99.95 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 30 | 100 |
H | 10 | 20 |
N | 10 | 70 |
O | 40 | - |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Diameter (mm) | Diameter tolerance (mm) |
Ground | |
0.50-0.99 | ±0.007 |
1.00-1.99 | ±0.010 |
1.00-2.99 | ±0.015 |
3.00-15.9 | ±0.020 |
16.0-24.9 | ±0.030 |
25.0-34.9 | ±0.050 |
35.0-3939 | ±0.060 |
≥40.0 | ±0.20 |
Cleaned | |
0.50-4.0 | ±2.0% |
4.10-10.0 | ±1.5% |
15.0-50.0 | ±0.30 |
51.0-75.0 | ±0.40 |
75.1-120.0 | ±1.00 |
121.0-165.0 | ±1.50 |
Turned | |
40.0-49.9 | ±0.30 |
50.0-165.0 | ±0.40 |
Length and straightness:
Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
Cleaned | Ground/turned | ||
0.50-0.99 | >500 | <2.5 | <2.5 |
1.00-9.90 | >300 | <2.0 | <1.5 |
10.0-165.0 | >100 | <1.5 | <1.0 |
Length tolerance:
Diameter 0.50-30.0 mm | ||||||
Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2.0 |
Diameter >30.0 mm | ||||||
Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | >2000 |
Length tolerance(mm) | ±1.0 | ±1.5 | ±2.5 | ±4.0 | ±6.0 | ±8.0 |
Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
Diameter(mm) | Tensile strength(MPa) | 0.2% Yield Strength(MPa) | Elongation(%) | Hardness(HV 10) |
0.50-3.18 | ≥585 | ≥450 | ≥15 | |
3.18-10.30 | ≥515 | ≥380 | ≥15 | |
10.32-22.20 | ≥620 | ≥515 | ≥18 | 230-280 |
22.20-28.60 | ≥585 | ≥480 | ≥15 | 225-270 |
28.60-47.60 | ≥515 | ≥450 | ≥10 | 215-260 |
47.60-73.00 | ≥480 | ≥415 | ≥10 | 210-250 |
73.00-88.90 | ≥450 | ≥380 | ≥10 | 205-240 |
89.00-120.9 | ≥450 | ≥380 | ≥5 | 200-240 |
121.0-164.9 | ≥450 | ≥380 | ≥5 | 180-240 |
165.0 | ≥450 | ≥380 | ≥- | 180-240 |
Surface condition:
Surface: | Cleaned | Ground | Turned |
φ0.50-165mm | φ0.50-50.00mm | φ≥40.00mm | |
Roughness | Diameter (mm) | Ra (μm) Ground | Ra (μm) Turned |
≤2.50 | ≤0.80 | - | |
2.5-50.0 | ≤1.00 | - | |
≥40.0 | - | ≤3.2 |